T1-55

Multichannel preset counter and frequency meter with 2 encoder inputs

The T1-55 is a module suited for DIN rail mounting that can be linked to a local operator panel (F1-10); it provides 2 encoder inputs for frequency up to 50 kHz and 8 digital inputs for frequency up to 0.5 kHz with 10 pulse counters and 10 frequency meters (one for each input).

Functies
Specificaties
Accessoires
Toepassingen

The multichannel preset counter and frequency indicator T1-55 can manage 8 independent preset
digital outputs related to the totalizing counters or the frequency values of pulses read through 8 digital
inputs and 2 encoder inputs; one of these can be a bi-directional encoder with a marker pulse that can
automatically reset the related up/down totalizing counter; also 2 analog outputs are available as an
option. The T1-55 is made of a base module that can be mounted on a DIN rail and a front mounting
operator panel that offers an effective and easy to use programming and supervision interface; special menu driven procedures allow confi guration of measuring units, preset values, counters reset modes and
operation logic. The good operation of the device is controlled by a watch-dog and indicated through
a “status-ready” output. The link with a supervisory center is provided by a serial RS422/485 interface
with a Modbus protocol.

Digital inputs:	• 8 Digital inputs, common positive (24 V) and can be used for reading pulses with frequency less than 500 Hz and 50% duty cycle
Digital outputs:	• 8 Digital outputs, PNP type (24 V) with maximum current 100 mA
Encoder inputs:	• 2 Encoder inputs, optically isolated and have a status indicator led; they accept both balanced (line driver) and unbalanced (open collector) signals with frequency up to 30 kHz. One of the two inputs can be connected to a bi-directional encoder with marker puls
Totalizing counter and frequency:	• For each digital input and encoder input a frequency measurement and a totali-zing counter are provided
Preset outputs:	• The eight digital outputs are freely configurable as preset outputs
Communication interface:	• optically isolated RS422/485 serial communication interface with Modbus protocol; up to 31 devices can be connected to the same master supervision unit.
Scada software:	• WINLOG-A is the real time software package reccomanded when a PC supervision of T1- 55 devices is required. WINLOG-A software provides an operator interface in a Windows environment for process supervision, recipes programming, analysis of historical trends, alarms management, and printing of reports.