BIALON DK-01 PLT
I/O Module with Built-in Room Control for LONWORKS® Power Line Networks
The BIALON DK01 allows control functionality in a LONWORKS® Power Line or Free-Topology network.
Via the STV bus, additional sensors and actuators can be connected and integrated into the LONWORKS® network cost-effectively. All digital inputs and outputs, as well as the sensors and actuators connected to the STV bus, are available for the entire LONWORKS® network as SNVT.
The BIALON DK01 allows control functionality in a LONWORKS® Power Line or Free-Topology network.
Via the STV bus, additional sensors and actuators can be connected and integrated into the LONWORKS® network cost-effectively. All digital inputs and outputs, as well as the sensors and actuators connected to the STV bus, are available for the entire LONWORKS® network as SNVT.
In addition to the digital I/O functions, there is a room control already completely integrated in the BIALON DK01. The room controlling objects in the module are pre-configured already, thus the controller application can be used without extra bindings.
All software objects are programmed according to LONMARK® standard. For the configuration of the
BIALON DK01, there is a free-of-charge LNS plug-in available at the STV web site.
| Supply voltage: |
• 110V to 250V A/C • 160V to 400V D/C • 24V AC/DC |
| Input: |
• 2x galvanically isolated 12 ... 24V AC/DC,high level > 8 V, input resistance 4.7kOhm • 2x galvanically isolated 110 V ... 230V AC/DC, high level > 100 V input resistance 220 kOhm |
| Relay outputs: |
• 2x galvanically isolated, switching voltage max. 230V AC/DC, 16A ohm resistive load; 8A inductive load (cos ϕ = 0.5), turnkey |
| Serial interface: | • 2400 Baud (STV bus) |
| Micropocessor: | • Neuron® 3150 |
| Indication: |
• Green LED: 2x LED 2x digital input • Yellow LED: 2x LED 2x digital output • Green LED: Power On • Yellow LED: service; fault • Green LED: PKD (Packed Detect) • Yellow LED: BIU (Band In Use) |
| Installation: | • service pin |
| Transmission media: |
• LON Power Line • LON Power Line currentless (max. 20,000m) • FTT-10A |
| Operating temperature: | • 0 ... 50°C |
| Relative Humidity: | • 0 ... 90% (not condensing) |
| Housing: |
• According to EN 50022 for DIN rail mounting, 6 separating units, protection class IP 20 |
| Dimensions (LxWxH) | • 108 mm/90 mm/66 mm (6 SU; DIN rail 50022) |
| ordering number: | • 98F3200 |
• Room control
