BIALON DK-10DI FTT

Digital Input Module for LONWORKS® Free-Topologie Networks

Functies
Specificaties
Accessoires
Toepassingen

The BIALON DK-10DI allows the acquisition of 10 digital inputs in LONWORKS® Power Line or Free-
Topology networks. The switch as well as the push button can be analyzed via the galvanically isolated
inputs. The potential separation requires an external power supply. Alternatively, the module provides a
12V output voltage (no potential separation). As SNVT_switch and SNVT_lev_disc, the input signals
acquired are available to the entire LONWORKS® network. The status of each digital input is indicated by an LED. All software objects are programmed according to LONMARK® Standard. For configuring the BIALON DK-10DI, there is a free of charge LNS plug-in available on the STV-website.

Supply voltage:	• 110V to 250V A/C • 160V to 400V D/C • 24V AC/DC
Input:	• 10x galvanically isolated 12 ... 24V AC/DC high-level > 8V input resistance 4.7 kOhm
Relay outputs:	• 2x galvanically isolated, switching voltage max. 230V AC/DC, 16A ohm resistive load; 8A inductive load (cos ϕ = 0.5), turnkey
Connection:	• Terminals max. 2.5mm²
Micropocessor:	• Neuron® 3150
Indication:	• Green LED: 10x LED for 10x digital input • Green LED: Power On • Yellow LED: service; fault • Green LED: PKD (Packed Detect) • YellowLED: BIU (Band In Use)
Installation:	• service pin
Transmission media:	• LON Power Line • LON Power Line currentless (max. 20,000m) • FTT-10A
Operating temperature:	• 0 ... 50°C
Relative Humidity:	• 0 ... 90% (not condensing)
Housing:	• According to EN 50022 for DIN rail mounting, 6 separating units, protection class IP 20
Dimensions (LxWxH)	• 108 mm/90 mm/66 mm (6 SU; DIN rail 50022)
ordering number:	• 98F3217