USBPort/2
Isolated 2 port RS232 / RS422 / RS485 USB serial Hub
USBPort/x & USB400 products for USB bus offer performance, simplicity of installation, security, robustness and high reliability at affordable prices.
Products exist in 1, 2 and 4 ports with 3 in 1 serial interface RS232, RS422 & RS485 and galvanic isolation depending to models to cover all technical requirements of industrial environments.
Installation is quite simple as the product is instantly plug & play, it doesn't require any IRQ, DMA or I/O port resources.
Installed serial ports are considered by Windows 9x, Windows 2000, Windows XP, Linux operating systems as computer's standard COM ports.
This new range of serial to USB solution (USBPort/x) offers performance, simplicity of installation, security, robustness and high reliability. USBPort/x is proposed in two models: 2 and 4 isolated port with 3 in 1 serial interface RS232, RS422 & RS485 in order to cover all technical requirements of industrial environments. USBPort/x installation is quite simple as the product is instantly plug & play, it doesn't require any IRQ, DMA or I/O port resources. Installed serial ports are considered by Windows 2000, 2003, XP, VISTA, SEVEN & Linux operating systems as computer's standard COM ports.
2 ports with built-in 3 in 1 serial electrical interface: RS232, RS422 & RS485
Each serial port supports from 300 to 3 Mbps (accurate adjustment thanks to a decimal divider)
Built-in FIFOs: TX 256 bytes, RX 384 bytes
Built-in self line turn-around in the RS485 mode
Support of both 4 wires RS422/RS485 & RS485 2 wires electrical interfaces
LEDs signalling of the state of TxD & RxD signals on each port
Powered from USB bus or from an external power source (+9VDC to +36VDC)
Hot "Plug & Play", USB 2.0 standard full speed, USB 1.1 compatible
Installed COM ports are compatible with Windows standard COM ports
15 KV line surge protection, HF filtering
1500V opto isolation on RS422/RS485 serial ports
Robust metallic case, CE industrial standards conformity
| Format: | • Table case/wall mount |
| Number of channels: | • 2 |
| RS types: | • RS232, RS422 / RS485 (2/4 wires) |
| RS485 self line turn-around: | • Yes |
| Maximum speed: | • 921 Kb/s Full duplex |
| Serial connection: | • Female Sub D9 (RS232), screw-in terminal block |
| Power supply: | • From USB bus or external (+9VDC to +36VDC) |
| USB bus type: | • 2.0, 1.1 compatible |
| Galvanic isolation: | • 2500 Veff for RS422 / RS485 link |
| signaling LEDs: | • Yes |
PWS-12
Optional external power source (+12VDC / 5.5W) for USBPort/x series (required when chaining several devices on the same USB port or when the USB HUB deliver less than 500 mA)
IA, PLC, CNC, SCADA
