01500 5021

Fiber optic optical bypas, x-light 50MM

The x-light ensures a safe communication in case of a device failure in multimode 50/125µm fiber optic networks. The units works manufacturer and protocol independent in line or redundant ring topology networks. The x-light is activated once the voltage level is lower then the adjusted voltage level. It can also be actived via the trigger input in case of maintenance or replacing a defect network device.

Read more

Product variants

Article Number Product Name
01500 5021 + x-light-1 50 MM ST + Request quote
x-light-1 fiber optic optical bypass with ST adapter, 50/125µ multimode
01500 5023 + x-light-1 50 MM SC + Request quote
x-light-1 fiber optic optical bypass with SC adapter, 50/125µ multimode
01500 5024 + x-light-1 50 MM LC + Request quote
x-light-1 fiber optic optical bypass with LC adapter, 50/125µ multimode
01520 5021 + x-light-2 50 MM ST + Request quote
x-light-2 fiber optic optical bypass with ST adapter, 50/125µ multimode
01520 5023 + x-light-2 50 MM SC + Request quote
x-light-2 fiber optic optical bypass with SC adapter, 50/125µ multimode
01520 5024 + x-light-1 50 MM LC + Request quote
x-light-2 fiber optic optical bypass with LC adapter, 50/125µ multimode

Description

x-light ensures a safe communication even in case of device failure by optically bypassing the defective node so that a permanent data transmission is guaranteed. x-light is manufacturer and protocol independent so that it perfectly integrates into every network, regardless of the structure (ring or line). x-light is activated once the voltage is lower than the adjusted voltage level. Furthermore, the system can be controlled flexibly via the trigger input, e.g. in case of service or failures. x-light provides highest availability in multi- or singlemode fiber optic networks. Additional features are a high temperature range, a redundant power supply, a cost effective solution because it needs no additional UPS (uninterrupted power supply) and it reduces service costs. The stainless steel housing offers an extremely high degree of flexibility and safety for all kinds of indoor and outdoor applications. It can either be mounted onto a DIN EN rail or fastened onto the wall.

Specifications

FO-connector:
ST, SC or LC
Fiber type:
Multimode 50/125µm
Wavelength:
850 nm (±40 nm) 1310 nm (±40 nm)
Demping:
  • x-light-1 ≤ 1,4 dB
  • x-light-2 ≤ 1,5 dB
Durability switch:
10 million
Switching speed:
15 ms max./4 ms typ./4 ms in a temperature range between +5°C and +70°C
Switching type:
non latching
Switch-on delay:
5 s, 10 s, 20 s and/or 40 s, switchable by DIP-Switch
Threshold level:
Between 10 V and 64 V switchable by DIP-Switch (1 V, 2 V, 4 V, 8 V, 16 V and/or 32 V)
Connector:
2 x 4-pin power supply / 4 pin failure relay and signal input
Status LEDs:
Power (green) / error (red) / ready (green)
Power supply:
10 to 64 VDC
Power consumption:
2,5 Watt
Failure relay:
25 VDC (1 A) / 60 VDC (0,3 A)
Operating temperature:
  • x-light-1 -40°C to +70°C
  • x-light-2 -20°C to +55°C
MTBF
1.336.702h
EMC:
EN61000-6-2/EN55022 Klasse B (2016-02)
Weight:
500g
Dimensions:
60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing:
Stainless steel, powder coated

Do you have a request?

Request type
Art. Nr. Product name Remove

You can add another variation to your request

Do you have a request?