1x S0 impuls to singlemode optic converter, IOL3400
The FO-system IOL3400 is used for the uni directional transmission of a S0 impulse output from energy meters via singlemode (SM) fiber optics. BIDI technology means that there is only one fiber for transmitting and receiving of the data.
Product variants
Article Number | Product Name | |
---|---|---|
0340001331 + 034002331 + | IOL-3400/TRX-1S0-13-SM-ST | + Request quote |
IOL3400, transmitter + receiver, 1x S0 IN, 1x digital relay OUT, ST, via singlemode fiber optic | ||
0340001333 + 034002333 + | IOL-3400/TRX-1S0-13-SM-SC | + Request quote |
IOL3400, transmitter + receiver, 1x S0 IN, 1x digital relay OUT, SC, via singlemode fiber optic | ||
0340001333-BIDI-A + 034002333-BIDI-B + | IOL-3400/TRX-1S0-13-SM-SC-BIDI | + Request quote |
IOL3400, transmitter + receiver, 1x S0 IN, 1x digital relay OUT, SC-BIDI, via singlemode fiber optic | ||
0340001335 + 034002335 + | IOL-3400/TRX-1S0-13-SM-E2000 | + Request quote |
IOL3400, transmitter + receiver, 1x S0 IN, 1x digital relay OUT, E2000, via singlemode fiber optic |
Description
With the fiber optic system IOL3400 the signals of one S0 pulse output can be extended by fiber optic cable (FOC). The system consists of a transmitting device IOL3400-TX and a receiving device IOL3400-RX that are connected via a simplex or duplex optical fiber connector. For transmission of the pulses only a simplex FOC is required. In this case interruptions of the light signal will be displayed only on the IOL3400-RX and signaled via its fault relay contact. By using a duplex fiber optic cable also the IOL3400-TX can show a problem of the fiber optic connection and signal it via its fault relay contact.
Specifications
- FO-connector:
- ST, SC, E2000 or SC-BIDI
- Fiber type:
- Singlemode 9/125μm
- Optical budget:
- 17 dB
- FO range:
- 30 km, others up to 100 km on request (0,3 dB/km)
- Wavelength:
- 1310 nm (1310/1550 nm for BIDI version)
- Signal input:
- acc. to EN62053-31, Class A or Class B depending on IOL-3400 Power supply
- Signal output:
- acc. to EN62053-31
- Cable length:
- 1m
- Failure relay:
- 24 VDC (1A) / 60 VDC (0,3 A)
- LED indication:
- Power supply (green) / Data (yellow) / Status (red)
- Power supply:
- 12–30 VDC
- Power consumption:
- 2,5 Watts, 100 mA (24 V)
- Operating temperature:
- –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
- EMC:
- EN61000-6-2 / EN55022 Class B + A1 + A2
- Weight:
- 150 g
- Dimensions:
- 22,5 x 93 x 82 mm
- Housing:
- Polyamid, black