010007951

MODBUS to POF or HCS converter, DL485-MBR

The DL-485-MBR is a MODBUS to POF or HCS fiber optic converter to create a redundant MODBUS network.

Read more

Product variants

Article Number Product Name
010007951 + DL-485-MBR/2x13-POF-ST MBR/POF/Ring + Request quote
DL-485-ST, MODBUS converter for ring connections over POF fiber optic.
010007962 + DL-485-MBR/2x13-HCS-SC MBR/HCS/Ring + Request quote
DL-485-ST, MODBUS converter for ring connections over HCS fiber optic.

Description

The fiber optic systems DL485-MBR secure the optical data transfer within MODBUS networks up to a data speed of 115,2 KBit/s. Our special multifunctional fiber optic system allows the construction of optical ring structures.

The system of this series is especially suitable for applications with strict safety-related requirements as for instance: process industry, tunnel ventilation systems and railway technology.

LEDs and potential-free contacts of a fault detector relay are able to signal defective states.

FiberView works similarly to a traffic light. If the “traffic light” is green, everything is fine. If the yellow LED lights, the budget is still tolerable, but already below a certain system reserve. Additionally to the LED, this pre-warning level is also signaled by a potential-free contact. If the “traffic light” turns red there is a serious error.

Specifications

FO-connector:
ST
Fiber type:
POF 980/1000μm / HCS 200/230µm
Optical budget:
12 dB
FO range:
POF 50m (180 dB/km) / HCS 200m (180 dB/km)
Wavelength:
POF 650nm / HCS 850nm
Data rate:
9,6 KBit/s, 19,2 KBit/s, 38,4 KBit/s, 57,6 KBit/s oder 115,2 KBit/s
Transmission type:
Half duplex
Terminating resistor:
Switchable: none or wave impedance (Rw + Rpd + Rpu)
RS485 Cable length:
1200m
RS485 connector:
9-pole Sub-D female and 6-pole terminal
Status-LEDs:
Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
Power supply:
12–30 VDC, other voltages on request
Power consumption:
5 Watt, 200 mA (24 V)
Galvanic isolation:
500 VDC (24 VDC <> RS485)
Operating temperature:
–40 °C – +70 °C (Multimode and Singlemode with ST or SC), –20 °C – +55 °C (all others)
EMC:
EN61000-6-2/EN55022 Class B + A1 + A2
Weight:
570 g
Dimensions:
H: 115 mm, W: 61 mm, D: 113 mm
Housing:
Stainless steel, powder coated

Do you have a request?

Request type
Art. Nr. Product name Remove

Do you have a request?