010006431

MODBUS-Plus to Singlemode converter, DL485-MBP

The DL485-MPB is a MODBUS-Plus to Single mode fiber optic converter for a point-to-point connection.

Read more

Product variants

Article Number Product Name
010006431 + DL-485-MBP/13-SM-ST MBP/SM/PzP + Request quote
DL-485-ST, MODBUS-Plus converter for point-to-point connection via Single mode fiber optic.
010006433 + DL-485-MBP/13-SM-SC MBP/SM/PzP + Request quote
DL-485-SC, MODBUS-Plus converter for point-to-point connection via Single mode fiber optic.
010006433-BIDI-A + DL-485-MBP/13-SM-SC-BIDI-A MBP/SM/PzP + Request quote
DL-485-SC-BIDI-A, MODBUS-Plus converter for point-to-point connection via Single mode fiber optic.
010006433-BIDI-B + DL-485-MBP/13-SM-SC-BIDI-B MBP/SM/PzP + Request quote
DL-485-SC-BIDI-B, MODBUS-Plus converter for point-to-point connection via Singel mode fiber optic.
010006435 + DL-485-MBP/13-SM-E2-BIDI-B MBP/SM/PzP + Request quote
DL-485-E2000, MODBUS-Plus converter for point-to-point connection via Singel mode fiber optic.

Description

The fiber optic systems DL485-MBP connect a Modbus-Plus interface to optical field bus networks. With the help of this innovative system optical bus, star, tree and mixed structures are possible.

LEDs and potential-free contacts (optional for DL485-MBP) of a fault detector relay are able to signal defective states.

Specifications

FO-connector:
ST, SC, E2000 or SC-BIDI
Fiber type:
Singlemode 9/125μm
Optical budget:
16 dB
FO range:
30 km, others up to 100 km on request (0,3 dB/km)
Wavelength:
1310 nm (1310/1550 nm for BIDI version)
Data rate:
1 MBit/s
Transmission type:
Half duplex
Signal delay:
  • MODBUS Plus Interface <> LWL: < 400 ns / Tx <> Rx: 500 ns
  • MBPR: MODBUS Plus Interface <> LWL : < 1 μs
Terminating resistor:
Acc. to MODBUS Plus specification there are no terminating resistors
RS485 cable length:
50m
RS485 connector:
9-pole Sub-D female and 6-pole terminal
Status LEDs:
Power supply (green) / Failure (red) / Data receive (green) / Status (red)
Power supply:
5 Watt, 200 mA (24 V)
Galvanic isolation:
500 VDC (24 VDC <> RS485)
Operating temperature:
–40°C to +70°C (Multimode and Singlemode with ST or SC) / –20°C to +55°C (all others)
EMC:
EN61000-6-2/EN55022 Class B + A1 + A2
Weight:
570 g
Dimensions:
60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing:
Stainless steel, powder coated

Do you have a request?

Request type
Art. Nr. Product name Remove

Do you have a request?