010006231
Profibus to Single mode converter, DL485-PB
Product group
The DL485-PB is a Profibus to Single mode fiber optic converter to create a point-to-point network.
Product variants
Article Number | Product Name | |
---|---|---|
010006231 + | DL-485PB/13-SM-ST RS485/Profibus/SM/PzP/FiberView | + Request quote |
DL-485PB-ST, Profibus converter for point-to-point connections over Single mode fiber optic. | ||
010006233 + | DL-485PB/13-SM-SC RS485/Profibus/SM/PzP/FiberView | + Request quote |
DL-485PB-SC, Profibus converter for point-to-point connections over Single mode fiber optic. | ||
010006233-BIDI-A + | DL-485PB/13-SM-SC-BIDI-A RS485/Profibus/SM/PzP/FiberView | + Request quote |
DL-485PB-SC-BIDI-A, Profibus converter for point-to-point connections over Single mode fiber optic. | ||
010006233-BIDI-B + | DL-485PB/13-SM-SC-BIDI-B RS485/Profibus/SM/PzP/FiberView | + Request quote |
DL-485PB-SC-BIDI-B, Profibus converter for point-to-point connections over Single mode fiber optic. | ||
0140006235 + | DL-485PB/13-SM-E2 RS485/Profibus/SM/PzP/FiberView | + Request quote |
DL-485PB-E2000, Profibus converter for point-to-point connections over Single mode fiber optic. |
Description
The systems DL485-PB connect ProfiBus-field bus networks by fiber optics. With the help of this innovative system, optical bus, star, tree and mixed structures are possible.
LEDs and potential-free contacts of a fault detector relay are able to signal defective states.
FiberView works similarly to a traffic light. If the “traffic light” is green, everything is fine. If the yellow LED lights, the budget is still tolerable, but already below a certain system reserve. Additionally to the LED, this pre-warning level is also signaled by a potential-free contact. If the “traffic light” turns red there is a serious error.
Specifications
- FO-connector:
- ST, SC, E2000 or SC-BIDI
- Fiber type:
- Singlemode 9/125µm
- Optical budget:
- 16 dB
- FO range:
- 30 km, others up to 100 km on request (0,3 dB/km)
- Wavelength:
- 1310 nm (1310/1550 nm for BIDI version)
- Data rate:
- 12 MBit/s
- Transmission type:
- Half duplex
- Signal delay:
- RS485 <> LWL: < 3 TBit / Tx <> Rx: 11 TBit
- Terminating resistor:
- Switchable: none or wave impedance (Rw + Rpd + Rpu)
- RS485 cable length:
- 1200 m (9,6 - 187,5 KBit/s), 400 m (500 KBit/s), 200 m (1,5 MBit/s), 100 m (3 MBit/s-12 MBit/s)
- RS485 connector:
- 9-pole Sub-D female and 6-pole terminal
- Status LEDs:
- Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
- Power supply:
- 12 to 30 VDC, other voltages on request
- Power consumption:
- 5 Watts, 200 mA (24 V)
- Galvanic isolation:
- 500 VDC (24 VDC <> RS485)
- Operating temperature:
- -40°C to +70°C (Multimode and Singlemode with ST or SC) / -20°C to +55°C (all others)
- EMC:
- EN61000-6-2/EN55022 Class B + A1 + A2
- Weight:
- 570 g
- Dimensions:
- 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
- Housing:
- Stainless steel, powder coated