095003

LonWorks S0 energy counter modules, DK-10S0

With the DK-10S0 it is possible to collect the data of all kind of energy meter with an S0 interface via the 230VAC power line or twisted-pair cabeling. In case of power loss the data will be stored for up to 10 years.

Read more

Product variants

Article Number Product Name
095003 + BIALON DK10S0 PLT 230VAC + Request quote
10 S0 impulse counter, PLT20 C-band power line interface, power supply 230VAC
095001 + BIALON DK10S0 FTT 230VAC + Request quote
10 S0 impulse counter, TP/FTT10 free topology twisted pair interface , power supply 230VAC
095007 + BIALON DK10S0 FTT 24VAC/DC + Request quote
10 S0 impulse counter, TP/FTT10 free topology twisted pair interface, power supply 24VAC/DC

Description

The BIALON DK-10S0 allows for fully automatic data acquisition of energy, gas, water and heat flow meters with S0 pulse output in LONWORKS® Power Line or Free-Topology networks. All recorded data are available to the entire LONWORKS® network as SNVT. The meter objects of the module are already pre-configured for acquisition of energy and volume data, thus the BIALON DK-10S0 is ready for direct use without further configuration efforts. All software objects are programmed according to LONMARK® standard. A free-of-charge LNS plug-in is available for configuration of the BIALON DK-10S0. 

The BIALON DK-10S0 consumption data acquisition module is used to acquire several energy meters with S0 interface. You can connect up to 7 energy meters and up to 3 volume meters. Additionally, a summation of the configurable time for energy and volume data is available, as well as a consumption data evaluation per time via LONWORKS® network. In case of a voltage breakdown, all S0 meter values are stored for up to 10 years.

  • LONWORKS® I/O-module with 10 S0 inputs
  • 7 S0 inputs for energy data capture 3 S0 inputs for volume data capture
  • Summation of all consumer data
  • Consumer data calculation per time period
  • Data buffer in case of power outages
  • Option of Power Line or Free Topology network connectivity
  • Interoperability thanks to standard LONMARK® objects
  • Plug-in for convenient configuration in an LNS®- based Tool
  • Supply voltage of 230VAC or 24VAC/DC

Specifications

Supply voltage:
110V - 250VAC or 20V - 24VAC/DC
Inputs:
10x S0, as per DIN 43864
Remote reading:
LONWORKS® Interface
Data storage:
min. of 10 years and 10,000 cycles in EEPROM
Processor:
FT-5000 or PL3150
LED indication:
LED green: 10x LED for 10x S0 interface LED green: power on LED yellow: service; malfunction LED green: PKD (packet detect) LONWORKS Message received LED yellow: BIU (Band In Use) payload signal present
Installation:
Service pin
Transmission media:
LON Power Line or Twisted Pair
Operating temperature:
0°C to +50°C
Relative humidity:
0 ... 90 % (non-condensing)
Housing:
Din-rail mounting, 6TE, protection class IP 20
Dimensions (L x W x H):
108 x 90 x 66 mm (6 TE)

Do you have a request?

Request type
Art. Nr. Product name Remove

You can add another variation to your request

Do you have a request?