M-Bus to IP interface converter, MPW25/IP
BESD offers a wide range of M-Bus to IP interface converters for 25 devices with an M-Bus interface. There are various converters with an Ethernet to M-Bus interface. The modules, suitable for DIN-rail mounting, can be supplied with 24V AC/DC or 230V AC.
|Article Number||Product Name|
|095062 +||BIALON MPW-25/IP 230Vac||+ Request quote|
|M-Bus level converter for 25 M-Bus devices, 10/100MBaseT Ethernet interface, power supply 230VAC|
|095063 +||BIALON MPW-25/IP 24Vac/dc||+ Request quote|
|M-Bus level converter for 25 M-Bus devices, 10/100MBaseT Ethernet interface, power supply 24V AC/DC|
The M-Bus level converter BIALON MPW-25/IP lets you connect up to 25 M-Bus endpoints with a standard load of 1.5 mA each to an M-Bus Master via an Ethernet connection. The M-Bus Master can be, e.g., a PC or an embedded controller. The level converter translates the signals from the M-Bus Master on the Ethernet interface to M-Bus signals, and vice-versa.
Up to 250 MPW-25/IP can be connected to a PC-based M-Bus Master.
The IP addresses on the level converter are assigned to virtual COM ports on the master. If needed, they can be grouped on the M-Bus Master via an additional program to use a single COM port. This means that an M-Bus Master program that only works with one COM port can communicate simultaneously with all M-Bus endpoints connected via the individual level converters. The level converter has overload protection and is thus short-circuit protected. The trip threshold is 58 mA. Additionally, the M-Bus interface has overvoltage protection on the bus side. The LEDs indicate the major operational and malfunction states, such as power supply, send or receive data, and bus overload. The M-Bus BIALON MPW-25/IP level converter is available in two variants with a 230 V AC or 24 V AC/DC power supply.
- M-Bus endpoints:
- 25 (standard load: 1.5 mA)
- Supply voltage:
- 110 V to 250 V AC or 20 V to 28 V AC/DC
- M-Bus voltage:
- 36 V - 42 V
- max. M-Bus idle current:
- 37.5 mA (25 standard loads)
- Over cuurent threshold:
- <58 mA
- Electrical isolation:
- between the power supply, Ethernet and M-Bus
- Transfer rate:
- M-Bus 300 … 9600 baud
- LED indication:
- LED green: power on
- LED yellow: Transmit M-Bus
- LED green: Receive M-Bus
- LED red: Bus Overload
- LED green: PKD (Packet Detect –> IP port)
- LED yellow: LNK (Link Status –> IP port)