USB to RS422/RS485 isolated converter, USB-485
The USB-485 is an isolated USB to RS422 or RS485 converter. It is ideal for computers which do not have a physical serial port and cannot be used with a conventional interface converter. The USB port also provides sufficient power for a full-spec RS422 or RS485 interface capable of driving termination resistors and long cables. Drivers are included (on an 80mm CD) to create a virtual COM port in the operating system.
The optional CAB-003-XLR cable converts the DB9 connector to the standard 3-pin male XLR used in professional broadcast applications. The USB-485 is unique in the market in that it has a world-unique device ID which ensures that it appears under the same COM port number regardless of which USB port on a particular PC it is plugged into. This simplifies application software configuration and eliminates many tech support issues.
Product variants
Article Number | Product Name | |
---|---|---|
1111-00-2119-485-01 + | USB-485 | + Request quote |
USB to RS422/RS485 isolated converter |
Description
The USB-485 is an isolated USB to RS422 or RS485 converter. It is ideal for laptops which do not have a physical serial port and cannot be used with a conventional interface converter. The USB port also provides sufficient power for a full-spec RS422 or RS485 interface capable of driving termination resistors and long cables. Drivers are included (on an 80mm CD) to create a virtual COM port in the operating system.
The USB-485 is unique in the market in that it has a world-unique device ID which ensures that it appears under the same COM port number regardless of which USB port on a particular PC it is plugged into. This simplifies application software configuration and eliminates many tech support issues.
The optional CAB-003-XLR cable converts the DB9 connector to the standard 3-pin male XLR used in professional broadcast applications.
As recommended by XTA, when combined with the CAB-003-XLR cable, this converter provides a remote interface between their iCore software and DP series audio management controllers.
Features include ...
- Converts a USB port into an isolated RS422 or RS485 port
- Isolation 100% tested at 1500V AC RMS
- Powered entirely from USB port
- Up to 115kbps data rate; all valid Win32 baud rates are supported
- Non-varying COM port number regardless of which USB port is used
- Driver support for Windows 98, ME, 2000, XP, Vista, Win7, Win8 and Win10 (32 and 64 bit)
- RS422 or RS485 DB9 pinouts similar to KK converters (K2/K3 range)
- Automatic RS485 driver enable - RTS Control not required
- RS422 or RS485 modes - RS422 or 2/4-wire RS485 - selectable via wiring options
- Unique USB device ID - non-varying COM port number
- Very low cost
- Optional 3-pin XLR adaptor cable available
Specifications
- Serial parameters:
- Max 115200bps, RS422, RS485 4-wire and RS485 2-wire
- RS485 connector:
- sub-D 9 female
- USB connector:
- USB A male, USB 1.1 (USB2 compatibel
- Power:
- From USB port, 90mA max.
- Isolation:
- 1500V AC RMS for 1second
- Drivers:
- Windows 98, ME, Win2000, WinXP, Vista, Win7, Win8, Win9x, Win10
- CE compliance:
- Emissions EN50081-2, Immunity EN50082-2
- Dimensions:
- 130mm x 53mm x 21mm (case only)