0103-2319-2326-01

Rugged WiFi access-point, WLg-xROAD

WLg-xROAD/N is a rugged equipment designed for applications in road transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, city buses, forklifts, trailers, tractors or cranes, for material handling, real-time information transmission, and inventory management. It fulfills the most severe requirements in terms of operating environment: from -25°C to +70°C, shock and vibration proof, protection against dust and water projections (IP65). The product is E-marked (CE standard for electronic equipments installed aboard vehicles), and can thus be installed in full safety aboard of all on-road equipments.

Read more

Product variants

Article Number Product Name
0103-2319-2326-01 + WLg-xROAD/N + Request quote
WiFi Access Point, Ethernet Bridge & WDS Repeater (a/b/g/h) for automotive applications, power input from +9VDC to +50VDC, incl. 1 dual band 2 dBi omnidirectional (2.4 / 5 GHz) antenna and Ethernet RJ45 cable of 2m
0103-2319-2326-02 + WLg-xROAD/NP + Request quote
WiFi Access Point, Ethernet Bridge & WDS Repeater (a/b/g/h) for automotive applications, PoE power supply (power over Ethernet, IEEE 802.3af), incl. 1 dual band 2 dBi omnidirectional (2.4 / 5 GHz) antenna and Ethernet RJ45 cable of 2m

Description

Main features:

  • WiFi IEEE 802.11 a/b/g/h & super AG, up to 108 Mbps
  • Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS
  • Web based configuration, SNMP administration
  • Auto-sensing 10/100 Base TX network interface
  • DC power supply input (+9VDC to +50VDC), POE IEEE 802.3af for /NP
  • Shock & vibration proof rugged aluminum enclosure, IP65 seal rating

Introduction
WLg-xROAD/N is a rugged equipment designed for applications in road transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, city buses, forklifts, trailers, tractors or cranes, for material handling, real-time information transmission, and inventory management.

It fulfills the most severe requirements in terms of operating environment: from -25°C to +70°C, shock and vibration proof, protection against dust and water projections (IP65).

The product is E-marked (CE standard for electronic equipments installed aboard vehicles), and can thus be installed in full safety aboard of all on-road equipments.

Specifications

Ethernet interface:
10/100 auto-sensing Ethernet port (terminal block inside the enclosure), plug & play mode & auto MDI/MDIX cross-over
WiFi interface:
Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among existing networks
Data rate:
Up to 108 Mbps (Super AG mode)
Channels:
13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode)
Output power:
Transmitter +20 dBm (TPC)
Sensitivity:
Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b
Antennas:
One 2dBi 2.4 / 5 GHz antenna, RP-SMA connector
Modulation:
OFDM: BPSK, QPSK, 16QAM, 64QAM and DSSS: DBPSK, DQPSK, CCK
Security:
64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control
Modes:
Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & fast roaming (less than 50 ms) modes are supported
Administration:
Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...), SNMP agent, ACKSYS NDM
Operating systems:
Windows, Linux, UNIX as well as any operating system supporting TCP/IP
LEDs signaling:
LEDs signaling for LAN, WLAN network activity, 10/100 mode, power supply
Power supply:
DC power supply (+9VDC to +50VDC) or POE IEEE 802.3af (for the /NP model)
Consumption:
3.6W typical power consumption, 4W for the /NP model
Dimensions & weight:
Shockproof rugged aluminum enclosure, (L: 115 x W: 64 x H: 35 mm), 370 g with the cable and without the antenna
Standards:
MIL-STD-810F method 514.5 & 516.5 (shocks & vibrations), IP65 seal rating EN 301489-17 & EN 61000-6-2 (CEM), E-marked (2004/104)
Environment:
Operating temperature: -25°C to +70°C (HR 0-99%), storage: -40°C to +80°C

Do you have a request?

Request type
Art. Nr. Product name Remove

Do you have a request?