CAN-bus naar POF of HCS fiber optic omvormer, DL-CAN-R
De DL-CAN-R modules verbinden CAN-veldbusnetwerken (bijv. CAN, CANopen, DeviceNet) via POF (Plastic Optical Fibre) of HCS (Hard Clad Silica) glasvezel met elkaar. Het speciale multifunctionele optische vezelsysteem DL CAN-R maakt het realiseren van optische ringstructuren mogelijk.
Product varianten
Artikelnummer | Productnaam | |
---|---|---|
010007551 + | DL-CAN/1x13-POF-ST CAN/POF/Ring | + Vraag offerte aan |
CAN-bus naar POF fiber optic omvormer foor een redundant ring netwerk, ST adapter. | ||
010007562 + | DL-CAN/1x13-HCS-ST CAN/HCS/Star | + Vraag offerte aan |
CAN-bus naar HCS fiber optic omvormer foor een redundant ring netwerk, ST adapter. |
Beschrijving
The DL CAN systems connect CAN field bus networks (e.g. CAN, CANopen, DeviceNet) via fiber optics. The special multifunctional fiber optic system DL CAN-R also allows the construction of optical ring structures.
LEDs and potential-free contacts of a fault detector relay are able to signal defective states.
FiberView works similarly to a traffic light. If the “traffic light” is green, everything is fine. If the yellow LED lights, the budget is still tolerable, but already below a certain system reserve. Additionally to the LED, this pre-warning level is also signaled by a potential-free contact. If the “traffic light” turns red there is a serious error.
Specificaties
- FO-connector:
- ST
- Fiber type:
- POF 980/1000µm/HCS200/230µm
- Optical budget:
- 12 dB
- FO range:
- POF 50m (180 dB/km) / HCS 200m (180 dB/km)
- Wavelength:
- POF 650nm / HCS 850nm
- Data rate:
- 10, 20, 22,2, 50, 100, 125, 250, 500, 800, 1000 KBaud Switchable: none or wave impedance (Rw + Rpd + Rpu)
- Transmission type:
- Half duplex
- Indentifier:
- 11 Bit, 29 Bit or both
- Terminating resistor:
- Switchable: none or wave impedance (Rw + Rpd + Rpu)
- CAN cable length:
- Acc. to CAN Specification
- CAN connector:
- 9-pole Sub-D female and 6-pole terminal
- Status LEDs:
- Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
- Power supply:
- 12 to 30 VDC, other voltages on request
- Power consumption:
- 5 Watts, 200 mA (24 V)
- Galvanic isolation:
- 500 VDC (24 VDC <> CAN)
- Operating temperature:
- -40°C to +70°C (Multimode and Singlemode with ST or SC) / -20°C to +55°C (all others)
- EMC:
- EN61000-6-2/EN55022 Class B + A1 + A2
- Weight:
- 570 g
- Dimensions:
- 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
- Housing:
- Stainless steel, powder coated