Automatische personenteller met RS485, PCN-1001


De PCN-1001 (DynaPCN 10-01) passagierteller is een compact en autonoom apparaat met RS485 interface op basis van non-contact stereoscopische vision-technologie. Het is speciaal ontworpen voor het tellen van passagiers boven de deuropeningen van bussen en treinen, en kan ook worden gebruikt om mensen te tellen bij het betreden of verlaten van gebouwen of een gebied met beperkte toegang.

Lees meer

Product varianten

Artikelnummer Productnaam
PCN-1001 + Personenteller met RS485 interface + Vraag offerte aan
Personenteller speciaal voor montage boven deurposten van bussen en treinen. RS485 insterface.


The PCN-1001 (DynaPCN 10-01-00) is a compact, low power, autonomous device based on non-contact stereoscopic vision technology. It has been specifically designed for passenger counting above the doorways in buses and trains; it can also be used to count people as they enter or leave buildings or any area with restricted access.
Stereoscopic cameras capture images of the area below the device. Thanks to the integrated high luminosity infrared LED indicators it can operate in any type of lighting condition. The extended temperature range capabilities allow integrators to use the device in a wide range of climatic conditions.
The PCN-1001 analyses the height, shape and direction of any object passing the field of view; if the object is recognized as a person entering or leaving, the incoming and outgoing counters are incremented accordingly, along with time and date information.
Data transfer is made via a RS-485 interface. The onboard insulated digital I/O interfaces can be used to directly communicate with intelligent doors or flow control systems, guaranteeing optimal functionality at all times: for example, stop counting when the doors are closed.
The PCN-1001 can be easily mounted in the ceiling space above a doorway becoming almost invisible. The angle of the optical panel can be adjusted from 0° to 45°; therefore, it can be placed in an ideal position even if the mounting surface is not horizontal.


Stereoscopic Cameras - Stereoscopic vision technology enables an accurate people bidirectional count, ideal for real-time optimization of resources and services

Reliable Operation - A built-in infrared illumination system allows a precise counting in any type of lighting condition

Lightweight and Robust - Extended operating temperature range, IP65 ingress protection, and sealed magnesium enclosure allow the PCN-1001 to work in a wide range of climatic conditions

EN50155 and Automotive - Certified for Rolling Stock and Automotive applications, where consistent performance and reliability are a must

Daisy Chainable - Two or more PCN-1001 can be interfaced together in order to precise count people passing through wide doorways

Easy to Integrate - The PCN 1001 can be used stand-alone or in conjunction with an IoT Edge Gateway, that enables data transmission to different Cloud platforms

Easy to Install - The installation is easy and unobtrusive thanks to its flush mountable and compact design, adaptable to different roofs and door structures; moreover a user-friendly configuration software allows a quick and easy setup


  • Technology - Stereoscopic Image Capturing
  • Accuracy - 98%
  • Precision - 99%
I/O interfaces:
  • USB - 1x USB 1.1 Client (Service Panel) - Type B Mini
  • Serial - 1x RS-485 (on 12pin Circular Connector), 1x RS-485 for Daisy Chain (on 12pin Female Circular Connector)
  • Digital I/O - 2x Insulated Digital Input, 2x Insulated Digital Output - on 12pin Circular Connectors
  • LEDs - 1x Power (Green), 1x System Status (Amber)
  • Buttons - 1x Reset (Service Panel)
  • Input - 9 - 36VDC
  • Consumption - Max Power Consumption: 3.2W with Infrared Illuminators OFF, 7.8W with Infrared Illuminators 100% ON
Operating Temperature:
EN50155 Class T1 (Factory Option: EN50155 Class TX)
  • Compliance - Automotive E24: ECE ONU Reg.10 – Fire Protection: EN45545 – EMC Emissions: EN50155 / EN50121 / EN50011 – EMC Immunity: EN50155 / EN50121 / EN61000 – Environmental: EN50155 – Vibrations & Shocks: EN50155 / EN61373
  • Ingress - IP65
Sealed Magnesium Alloy Enclosure
FRAME: 100x230x3mm (Height x Width x Thickness) – REQUIRED CUT-OUT: from 82x209x42mm (Height x Width x Depth, frame at 0°) to 82x209x70mm (Height x Width x Depth, frame at 45°)
0,6 kg

Heeft u een aanvraag?

Type aanvraag
Art. Nr. Productnaam Verwijderen

You can add another variation to your request

Heeft u een aanvraag?