GPRS datalogger met Modbus en M-Bus interface en Analoge/Digitale I/O, MX-4
De MX-4 is bedoeld voor real-time logging en analyse van gegevens. Met behulp van de GPRS/GSM datalogger worden gegevens verzonden naar externe gebruikers of een server. De MX-4 kan ook communiceren met andere controllers en sensoren. Het apparaat heeft een breed scala aan optionele interfaces en protocollen (Modbus RTU, Modbus TCP / IP, IEC60870-5-104: 2000, enz.) en kan elk type meter, controllers of sensoren lezen die zijn uitgerust met deze standaardprotocollen.
Product varianten
Artikelnummer | Productnaam | |
---|---|---|
MX-4.100.1.0000.4.0.0 + | MX-4, GPRS+Modbus RS485+Digital IN | + Vraag offerte aan |
Datalogger, Modbus (RS485) + GPRS + 16 x Digital IN + USB | ||
MX-4.100.1.0000.2.1.0 + | MX-4, GPRS+Modbus RS485+Digital IN+Digital OUT | + Vraag offerte aan |
Datalogger, Modbus (RS485) + GPRS + 8 x Digital IN + 8 x Digital OUT + USB | ||
MX-4.100.1.0000.4.1.0 + | MX-4, GPRS+Modbus RS485+Digital IN+Digital OUT | + Vraag offerte aan |
Datalogger, Modbus (RS485) + GPRS + 16 x Digital IN + 8 x Digital OUT + USB | ||
MX-4.100.1.3000.2.1.0 + | MX-4, GPRS+Modbus RS485+Analog IN+Digital IN+Digital OUT | + Vraag offerte aan |
Datalogger, Modbus (RS485) + GPRS + 4 x Analog IN + 8 x Digital IN + 8 x Digital OUT + USB | ||
MX-4.100.1.3000.4.1.0 + | MX-4, GPRS+Modbus RS485+Analog IN+Digital IN+Digital OUT | + Vraag offerte aan |
Datalogger, Modbus (RS485) + GPRS + 4 x Analog IN + 16 x Digital IN + 8 x Digital OUT + USB | ||
MX-4.410.1.3000.4.1.0 + | MX-4, GPRS+M-Bus+Modbus RS485+Analog IN+Digital IN+Digital OUT | + Vraag offerte aan |
Datalogger, Modbus (RS485) + GPRS + M-Bus + 4 x Analog IN + 16 Discrete IN + 8 x Discrete OUT + USB | ||
MX-4.xxx.x.xxxx.x.x.x + | MX-4, customized version | + Vraag offerte aan |
Datalogger, customized version. Use data sheet for configuration. |
Beschrijving
The data logger MX-4 is dedicated for real time logging, control and analyzing of data. Using GPRS/GSM, the logger sends data to remote users/server. MX-4 can also communicate with other controllers and sensors. The device has wide range of optional interfaces and protocols and can read any kind of meters, controllers and sensors equipped with standard protocols. Perfect for telemetry/monitoring, control and smart metering. The MX-4 data logger/controller can also measure and store different kinds of analog inputs (current, voltage, resistance or PT100 temperature sensors), digital inputs (alarms or events) and also it performs control capabilities over digital outputs (remote management).
• Possibility to choose interfaces: M-Bus, RS232, RS485, Data/Req, USB, GSM/GPRS, Analog IN, Discrete IN/OUT
• Reading data from any kind of meters (water, electricity, heat, gas, cooling ...) and controllers.
• Supported protocols: Modbus RTU, Modbus TCP/IP, M-Bus, IP, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP, IEC60870-5-104:200 and transparent.
• Independent data log with real time stamp (Real Time Clock)
• Remote communication and updates through GSM/GPRS
• Analog inputs (current, voltage, resistance, thermoresistance (Pt100, Pt1000, NTC))
• Discrete inputs (alarms or events)
• Control capabilities over digital outputs (remote management)
• Galvanically isolated interfaces and power supply
• SMS sending for alarm events
• Additional special transparent protocol data transfer
Specificaties
- CPU:
- ARM 7
- Flash:
- Archive storage up to 8 MB, data storage without power about 5 years
- RS232 (3 ports):
- Distance up to 15 m, speed up to 19,2Kbit/s
- RS485 (3 ports):
- Distance up to 1,2 km, max 32 transivers, speed up to 19,2 Kbits/s
- M-Bus (1 port):
- Up to 8 M-Bus devices
- Data/Req OPTO (1 port):
- (KAMSTRUP) data transfer interface
- GSM/GPRS:
- 3 Band 900/1800/1900 MHz
- USB:
- USB type B, ver. 2,0
- Digital input:
- 16x
- Digital output:
- 8 Open collector, >50VDC and >500mA
- Analog input:
- 4 Resistance, voltage or current, reading 10 times per second
- Protocols:
- Modbus RTU, Modbus TCP/IP, IP, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP, IEC60870-5-104:2000, DynDNS, FTP server, FTP client, DNS client
- Power supply:
- 9 - 36 VDC
- Over-voltage protection:
- >1000V
- Power consumption:
- 300mA max.
- Dimensions:
- 197 x 128 x 50mm
- Weight:
- 450g
- Mounting:
- DIN-rail
- Protection typ:
- IP20
- Operating temperature:
- -25°C to +60°C
- Real time clock:
- Yes
- Warranty period:
- 2 Years
- M-Bus auto setup:
- Yes