MX-9.0000.4.1.0.0

GPRS datalogger met wireless M-Bus, MX-9

Met de MX-9-datalogger kunnen Wireless M-Bus-, Modbus- en M-Bus-apparaten worden uitgelezen en de gegevens via het Modbus GPRS-modem worden verzonden naar externe gebruikers of server. Het biedt ook sms-verzendservices voor alarmmeldingen. De datalogger kan Kamstrup, Sensus, DIEHL, Danfoss, Itron, Landis & Gyr en andere meters (zoals exotische meters / industriële meters) uitlezen.

Lees meer

Product varianten

Artikelnummer Productnaam
MX-9.0000.4.1.0.0 + Wireless M-Bus OMS 868 MHz + Ethernet + Vraag offerte aan
MX-9 wireless M-Bus datalogger met Ethernet interface
MX-9.1000.4.0.0.0 + Wireless M-Bus OMS 868 MHz + GPRS + Vraag offerte aan
MX-9 wireless M-Bus datalogger met GPRS interface
MX-9.1100.4.0.0.0 + Wireless M-Bus OMS 868 MHz + GPRS + Modbus (RS485) + Vraag offerte aan
MX-9 wireless M-Bus datalogger met GPRS and Modbus interface
MX-9.1140.4.0.0.0 + Wireless M-Bus OMS 868 MHz + GPRS + Modbus (RS485) + M-Bus + Vraag offerte aan
MX-9 wireless M-Bus datalogger met GPRS, Modbus en M-Bus interface
MX-9.1140.4.0.1.0 + Wireless M-Bus OMS 868 MHz + GPRS + Modbus (RS485) + M-Bus + SD card slot + Vraag offerte aan
MX-9 wireless M-Bus datalogger met GPRS, Modbus en M-Bus interface en SD card slot
MX-9.1340.4.0.0.0 + Wireless M-Bus OMS 868 MHz + GPRS + Data/Req (Opto)* + M-Bus + Vraag offerte aan
MX-9 wireless M-Bus datalogger met GPRS, data/Req en M-Bus interface
MX-9.1131.4.0.1.0 + Wireless M-Bus OMS 868 MHz + GPRS + Ethernet + M-Bus + Modbus (RS485) + SD card slot + Vraag offerte aan
MX-9 wireless M-Bus datalogger met GPRS, Ethernet, M-Bus en Modbus interface en SD card slot
MX-9.xxxx.x.x.x.x + MX-9 customized version + Vraag offerte aan
See MX-9 data sheet for options

Beschrijving

Data Logger MX-9 is dedicated for reading Wireless M-Bus meters, real time logging and analyzing of data. Using GPRS/GSM or Ethernet, logger sends data to remote users / server. MX-9 can also communicate with other controllers and sensors. Device has wide range of optional interfaces and protocols and can read any kind of meters, controllers and sensors equipped with standard protocols. Perfect for smart metering of commercial, residential or industrial buildings.

  • Possibility to choose interfaces: Wireless M-Bus (433 / 868 MHz), M-Bus, RS232, RS485, Current Loop, Data/Req, USB, GSM/GPRS, Ethernet
  • Reading data from any kind of meters (water, electricity, heat, gas, cooling ...) and controllers.
  • Supported protocols: Wireless M-Bus, Modbus RTU, Modbus TCP/IP, M-Bus, IP, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP, IEC60870-5-104:200 and transparent.
  • Independent data log with real time stamp (Real Time Clock).  
  • Wireless M-Bus modes supported: T1, T2, S, S1, R,C,C1,N.
  • Remote communication and updates through GSM/GPRS or Ethernet
  • Galvanically isolated interfaces and power supply
  • SMS sending for alarm events.
  • Additional special transparent protocol data transfer.
  • Power supply for external powering of meters
  • Memory expansion: up to 32 GB using micro SD card

Specificaties

CPU:
ARM7
Flash:
archive storage up to 8 MB, independent data storage without power about 5 years
External memory:
up to 8 GB micro SD card
RS232 (4 ports):
distance up to 15 m, speed up to 19,2 Kbit/s
RS485 (3 ports):
distance up to 1,2 km, max 32 transivers, speed up to 19,2 Kbits/s
M-Bus (2 ports):
up to 16 M-Bus devices (up to 8 M-Bus devices for each M-Bus port)
Wireless M-Bus (1 port):
up to 300 Wireless M-Bus ( T, S, R, C modes, 433MHz/868MHz) devices
Data/Req (2 ports):
(KAMSTRUP) data transfer interface
Current Loop (2 ports):
25-27V, 14-20mA, up to 6 km, speed up to 19,2 Kbit/s
GSM/GPRS:
4 band 850/900/1800/1900 MHz
Ethernet:
10/100 Mbps, RJ45, distance up to 100 m
USB:
ver. 2,0, type B
Protocols:
Modbus RTU, Modbus TCP/IP, IP, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP, IEC60870-5-104:2000, DynDNS, FTP server, FTP client, DNS client
Power supply:
9-36 VDC
Over-voltage protection:
>1000V
Power consumption:
300mA max
Power for external devices:
3,7/5/6/8/10 V (<20mA)
Interface galvanic isolation:
500V
LED indication:
  • Power
  • Serial ports read/write for each port
  • GSM/GPRS modem status
  • Ethernet status
Programing and updating:
  • Remote: GSM/GPRS or Ethernet (RJ45)
  • Locally: RS232, RS485 or USB
Physical characteristics:
  • Dimensions 147x128x50 mm
  • Weight 400 g
  • Mounting type on DIN rail
  • Protection type IP20
Climate conditions:
  • Operating temperature -25 to +60°C
  • Storage temperature -40 to +60°C
  • Humidity range 5 – 95%, non-condensing

Heeft u een aanvraag?

Type aanvraag
Art. Nr. Productnaam Verwijderen

You can add another variation to your request

Heeft u een aanvraag?