RAY-3.104.1.0.000000.0.4.0.1.1

4G datalogger met Modbus en M-Bus interface en Analoge/Digitale I/O, RAY-3

De RAY-3 is een GPRS/4G datalogger met digitale I/O en analoge I/O.
De RAY-3 datalogger is speciaal bedoeld voor het meten van analoge (spanning, stroom, weerstand) parameters, voor het volgen van de status van digitale ingangen, het sturen van digitale uitgangssignalen, het archiveren en verzenden van data naar lokale gebruikers of server via RS232/RS485 of USB en voor externe gebruikers of server via Ethernet en/of GSM/GPRS/EDGE of UMTS/HSPA+ met behulp van het Modbus TCP/IP protocol.

 

Lees meer

Product varianten

Artikelnummer Productnaam
RAY-3.104.1.0.000000.0.4.0.1.1 + RAY-3 Modbus Ethernet datalogger digital in + Vraag offerte aan
Modbus (RS485) + M-Bus + Ethernet + 4 x Digitaal IN + battery backup + USB + SD card slot
RAY-3.104.0.3.000000.0.4.0.1.1 + RAY-3 Modbus 3G datalogger digital in + Vraag offerte aan
Modbus (RS485) + M-Bus + GPRS / 3G + 4 x Digitaal IN + battery backup + USB + SD card slot
RAY-3.100.1.0.120120.0.0.0.0.0 + RAY-3 Modbus Ethernet datalogger analog in + Vraag offerte aan
Modbus (RS485/RS232) + Ethernet + 6 x Analoog IN (Current / Voltage) + USB
RAY-3.100.0.3.120120.0.0.0.0.0 + RAY-3 Modbus 3G datalogger analog in + Vraag offerte aan
Modbus (RS485/RS232) + GPRS / 3G + 6 x Analoog IN (Current / Voltage) + USB
RAY-3.120.1.0.000000.0.0.0.0.1 + RAY-3 Modbus Ethernet data logger + Vraag offerte aan
Modbus (RS485/RS232) + RS232 + Ethernet + USB + SD card slot
RAY-3.120.0.3.000000.0.0.0.0.1 + RAY-3 Modbus 3G data logger + Vraag offerte aan
Modbus (RS485/RS232) + RS232 + GPRS / 3G + USB + SD card slot
RAY-3.100.1.0.000000.0.4.2.1.0 + RAY-3 Modbus Ethernet data logger digital I/O + Vraag offerte aan
Modbus (RS485/RS232) + Ethernet + 4 x Digitale inputs + 2 x Digitale relais outputs + USB + battery backup
RAY-3.100.0.3.000000.0.4.2.1.0 + RAY-3 Modbus 3G data logger digital I/O + Vraag offerte aan
Modbus (RS485/RS232) + GPRS / 3G + 4 x Digitale inputs + 2 x Digitale relais outputs + USB + battery backup
RAY-3.100.0.3.100100.2.4.0.0.0 + RAY-3 Modbus 3G data logger digital and analog in + Vraag offerte aan
Modbus (RS485) + GPRS / 3G + USB + 6 x Analoog IN + 4 x Digitaal IN + 2 x Analog Out
RAY-3.100.1.3.100100.0.4.2.0.1 + RAY-3 Modbus 3G/Ethernet data logger digital I/O and analog in + Vraag offerte aan
Modbus (RS485) + GPRS / 3G + Ethernet + USB + 2 x Analoog IN + 4 x Digitaal IN + 2 x Digitaal out (Relais) + Backup Battery + SD card slot
RAY-3.100.1.3.100100.2.4.2.1.0 + RAY-3 Modbus 3G/Ethernet data logger digital I/O and analog I/O + Vraag offerte aan
Modbus (RS485) + GPRS / 3G + Ethernet + USB + 6 x Analoog IN + 4 x Digitaal IN + 2 x Analoog Out + 2 x Digitaal out (Relais) + Backup Battery
RAY-3.xxx.x.x.xxxxxx.x.x.x.x.x + RAY-3 customized version + Vraag offerte aan
RAY-3 customer specific version. See data sheet for possibilities.

Beschrijving

The RAY-3 data logger is dedicated for measuring of analog (voltage, current, resistance) parameters, for tracking the status of discrete inputs, formation of discrete output signals, archiving and sending data to local users/server over RS232/RS485 or USB and to remote users/server over Ethernet or/and 4G/SM/GPRS/EDGE or UMTS/HSPA+ using Modbus TCP/IP protocol.

Technical Features

  •  Possibility to choose interfaces: M-Bus, RS232, RS485, USB, GSM/GPRS, Ethernet, Analog IN/OUT, Discrete IN/OUT
  • Supported protocols: Modbus RTU, Modbus TCP/IP, M-Bus, IP, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP, IEC60870-5-104:200 DynDNS, FTP server, FTP client, DNS client and transparent
  • Independent data log with real time stamp (Real Time Clock)
  • Alarm limits tracing of analog and discrete inputs, logging in event archive, warning about alarms over 4GGSM/GPRS/EDGE or UMTS/HSPA+, Ethernet and by sending SMS
  • Reading data from M-bus meters (heat, water, gas, electricity...) via M-Bus interface
  • Alarms status of analog and discrete channels fixing
  • Data from local device reading over RS232/RS485 (using Modbus RTU protocol) or USB 
  • Remote communication over Ethernet or GPRS/GSM / 4G
  • Up to 6 analog inputs (voltage, current, resistance, PT100)
  • Up to 2 analog outputs
  • Up to 4 discrete inputs (contact / impulse / alarm)
  • Up to 2 discrete relay outputs
  • Galvanically isolated interfaces and power supply
  • Additional special transparent protocol data transfer
  • Internal battery ensure at least 1 hour operation, after power fail

Did you know?

 - RAY-3 can read, analyze, track and control various switches, buttons, relay contacts and so on.
 - RAY-3 can control various devices via Discrete Outputs or Modbus and analyze operations of other devices via Discrete Inputs or Modbus.

Application possibilities

Advanced Data Logger / Control unit RAY-3 is dedicated for real time logging and analyzing different kinds of discrete signals and controlling other devices via Discrete Outputs or Modbus. Using GPRS / 4G or Ethernet, logger sends data to remote users / server. RAY-3 can also communicate with other controllers and sensors. Device has wide range of optional interfaces and protocols. Perfect for industrial control, telemetry/monitoring, control and smart metering.

Specificaties

CPU:
CORTEX M4
Flash:
Archive storage up to 8 MB, independent data storage without power about 5 years
SD card support:
Micro SD card up to 8 GB
RS232 (2 ports):
Distance up to 15 m, speed up to 19,2 Kbit/s
RS485 (1 port):
Distance up to 1,2 km, max 32 transivers, speed up to 19,2 Kbits/s
M-Bus (1 port):
Up to 8 M-Bus devices
GSM/GPRS:
4 Band 850/900/1800/1900 MHz
3G/HSPA+:
2 Band, depending on market 850/1900MHz, 900/2100MHz or 800(850)/2100MHz
Ethernet:
10/100 Mbps, RJ45, distance up to 100 m
USB:
Type B, ver. 2,0
Digital IN:
4 Sink contact
Digital OUT:
2 Relay 3A
Analog IN:
6 resistance, voltage or current, reading 10 times per second
Analog OUT:
2 Voltage 0-10V, load up to 5mA
Protocols:
  • Modbus RTU, Modbus TCP/IP, IP, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP
  • IEC60870-5-104:2000, DynDNS, FTP server, FTP client, DNS client, MQTT
Power supply:
9-36 VDC
Galvanic isolation:
>1000V
Internal battery:
3,7V 750 mAh
Dimensions:
147x128x50 mm
Weight:
400 g
Mounting:
DIN-rail
Protection type:
IP20
Operating temperature:
-25°C to +60°C
Real time clock:
Yes
Certifictions:
CE, RoHS
Warranty period:
2Years

Heeft u een aanvraag?

Type aanvraag
Art. Nr. Productnaam Verwijderen

You can add another variation to your request

Heeft u een aanvraag?