Robuust WiFi Access-Point, WLg-ABOARD
De WLg-ABOARD is een robuusts WiFi Access-Point, Ethernetbridge & repeater (WDS) voor de meest veeleisende industriële omgevingen. Het is ontworpen voor toepassingen in spoorwegen (CBTC-architecturen), wegtransport, zeetransport, magazijnen, landbouw, productievloeren, dokken, distributiecentra, scheepswerven ... het kan worden gemonteerd in vrachtwagens, treinen, trams, schepen, heftrucks, aanhangwagens, tractoren of kranen, voor draadloze datacommunicatie.
Uit productie
Product varianten
| Artikelnummer | Productnaam | |
|---|---|---|
| 0103-2319-2301-01 + | WLg-ABOARD/N | + Vraag offerte aan |
| WiFi Access Point, 2-port Ethernet Bridge & WDS Repeater (a/b/g/h) voor automotive toepassingen, dual DC power input van +9VDC to +72VDC, incl. 2 dual band 2 dBi omni-directional (2.4 / 5 Ghz) antennes, een set van 2 meters kabels (M12 naar RJ45 en M12 naar draadeind) | ||
| 0103-2319-2301-03 + | WLg-ABOARD/NP | + Vraag offerte aan |
| WiFi Access Point, 2-port Ethernet Bridge & WDS Repeater (a/b/g/h) voor automotive toepassingen, met POE IEEE 802.3af (zonder power kabel), incl. 2 dual band 2 dBi omni-directional (2.4 / 5 Ghz) antennes, een 2 meter Ethernet kabel (M12 naar RJ45) | ||
Beschrijving
Main features:
- WiFi IEEE 802.11 a/b/g/h & super AG, up to 108 Mbps
- Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS
- Web based configuration, SNMP administration, alarm contact
- 2-port auto-sensing 10/100 Base TX network interface
- Dual DC insulated power supply input (+9VDC to +140VDC), POE IEEE 802.3af
- Shockproof rugged IP 66 aluminum enclosure
Introduction
The WLg-ABOARD/N is a rugged equipment designed for applications in railways (CBTC architectures), on-road, marine transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, trains, tramways, freighter ships, forklifts, trailers, tractors or cranes, for material handling, real-time information transmission, and inventory management.
It fulfills the most severe requirements in terms of operating environment: from -25°C to +70°C (extended -40°C to +80°C), shockproof and vibration proof, IP66 seal rating for protection against dust and water projections.
The WLg-ABOARD/N is certified for railway applications (EN 50155 [IEC 60571] / EN 50121-3-2 / EN 50121-4); it is E-marked (CE standard for electronic equipments installed aboard vehicle), and can thus be installed in full safety aboard of all on-road equipments.
Specificaties
- Ethernet interface:
- 2-port Ethernet 10/100 auto-sensing, waterproof Ultra-Lock® M12 connectors (D-coding), plug & play mode & auto MDI/MDIX cross-over
- WiFi interface:
- Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 / 5.4 GHz standards, IEEE 802.11d support, dynamic Frequency Selection (DFS), "ClearVoice" band, transmission Power Control (TPC)
- Data rate:
- Up to 108 Mbps (Super AG mode)
- Channels:
- 2.4 GHz (802.11b/g): 14 channels / 5 GHz (801.11a/h): 24 channels
- Output power:
- Transmitter +20 dBm (TPC), +26 dBm with the [H4] option
- Sensitivity:
- Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b
- Antennas:
- Two 2dBi 2.4 / 5 GHz antenna, N-type connectors, optional lightning surge protection
- Modulation:
- OFDM: BPSK, QPSK, 16QAM, 64QAM and DSSS: DBPSK, DQPSK, CCK
- Security:
- 64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control
- Modes:
- Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & fast roaming (less than 50 ms) modes are supported
- Administration:
- Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...), SNMP agent, ACKSYS NDM
- Operating systems:
- Windows, Linux, UNIX as well as any operating system supporting TCP/IP
- Alarms:
- Relay output warning: power failure, WLAN connection failure, Watchdog or user defined (SNMP) 1 FORM B solid state relay, 60V 0.15A (M12 power supply connector)
- LEDs signaling:
- LEDs signaling for LAN, WLAN network activity, 10/100 mode, MAIN & AUX power supply, C-Key
- Power supply:
- 9-72VDC, insulated 9-36VDC or 36-140VDC, dual input (M12 connector) or POE (IEEE 802.3af)
- Consumption:
- 8W typical power consumption, 10W with the 400mW radio
- Dimensions & weight:
- Shockproof rugged aluminum enclosure, (L: 80 x l: 175 x h: 57 mm), 820 g with antennas
- Standards:
- MIL-STD-810F method 514.5 & 516.5 (shocks & vibrations) EN 301489-17 & EN 61000-6-2 (CEM), IP66 seal rating, E-marked (2004/104), EN 50155 (IEC 60571) / EN 50121-3-2, EN 50121-4 (railways)
- Environment:
- Operating temperature : -25°C to +70°C, extended -40°C to +80°C with [H4] option (HR 0-99%), storage : -40°C to +100°C
Accessoires
| Artikelnummer | Beschrijving |
|---|---|
| 0103-0103-0311-01 | C-Key_M1 |
| Save / Restore configuration key for the WLg-ABOARD | |
| 0103-0103-0804-01 | [H4] option |
| H4 means high power version (400mW) and extended temperature range (-40°C to +75°C) | |
| 0103-0103-0114-01 | WLg-ANT-LSP-N |
| Lightning Surge Protector 50 Ohms N-Type antenna 5 KA (0-6 GHz | |
| 0103-0103-0606-04 | WL-PLT-1 |
| 4-point fixing plate with ground lug | |