Rugged WiFi access-point, WLg-xROAD
De WLg-xROAD/N is een WiFi Access-Point, Ethernetbridge & repeater (WDS). De WLg-xROAD/N is een robuuste module die is ontworpen voor toepassingen in wegtransport, depots, magazijnen, landbouw, productievloeren, dokken, distributiecentra, scheepswerven ... Het kan worden gemonteerd in vrachtwagens, stadsbussen, vorkheftrucks, aanhangwagens, tractoren of kranen, voor real-time informatieoverdracht.
Product varianten
| Artikelnummer | Productnaam | |
|---|---|---|
| 0103-2319-2326-01 + | WLg-xROAD/N | + Vraag offerte aan |
| WiFi Access Point, Ethernet Bridge & WDS Repeater (a/b/g/h) voor automotive toepassingen, power input van +9VDC tot +50VDC, incl. 1 dual band 2 dBi omnidirectional (2.4 / 5 GHz) antenne en Ethernet RJ45 kabel van 2m | ||
| 0103-2319-2326-02 + | WLg-xROAD/NP | + Vraag offerte aan |
| WiFi Access Point, Ethernet Bridge & WDS Repeater (a/b/g/h) voor automotive toepassingen, PoE voeding (power over Ethernet, IEEE 802.3af), incl. 1 dual band 2 dBi omnidirectional (2.4 / 5 GHz) antenne en Ethernet RJ45 kabel van 2m | ||
Beschrijving
Main features:
- WiFi IEEE 802.11 a/b/g/h & super AG, up to 108 Mbps
- Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS
- Web based configuration, SNMP administration
- Auto-sensing 10/100 Base TX network interface
- DC power supply input (+9VDC to +50VDC), POE IEEE 802.3af for /NP
- Shock & vibration proof rugged aluminum enclosure, IP65 seal rating
Introduction
WLg-xROAD/N is a rugged equipment designed for applications in road transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, city buses, forklifts, trailers, tractors or cranes, for material handling, real-time information transmission, and inventory management.
It fulfills the most severe requirements in terms of operating environment: from -25°C to +70°C, shock and vibration proof, protection against dust and water projections (IP65).
The product is E-marked (CE standard for electronic equipments installed aboard vehicles), and can thus be installed in full safety aboard of all on-road equipments.
Specificaties
- Ethernet interface:
- 10/100 auto-sensing Ethernet port (terminal block inside the enclosure), plug & play mode & auto MDI/MDIX cross-over
- WiFi interface:
- Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among existing networks
- Data rate:
- Up to 108 Mbps (Super AG mode)
- Channels:
- 13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode)
- Output power:
- Transmitter +20 dBm (TPC)
- Sensitivity:
- Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b
- Antennas:
- One 2dBi 2.4 / 5 GHz antenna, RP-SMA connector
- Modulation:
- OFDM: BPSK, QPSK, 16QAM, 64QAM and DSSS: DBPSK, DQPSK, CCK
- Security:
- 64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control
- Modes:
- Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & fast roaming (less than 50 ms) modes are supported
- Administration:
- Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...), SNMP agent, ACKSYS NDM
- Operating systems:
- Windows, Linux, UNIX as well as any operating system supporting TCP/IP
- LEDs signaling:
- LEDs signaling for LAN, WLAN network activity, 10/100 mode, power supply
- Power supply:
- DC power supply (+9VDC to +50VDC) or POE IEEE 802.3af (for the /NP model)
- Consumption:
- 3.6W typical power consumption, 4W for the /NP model
- Dimensions & weight:
- Shockproof rugged aluminum enclosure, (L: 115 x W: 64 x H: 35 mm), 370 g with the cable and without the antenna
- Standards:
- MIL-STD-810F method 514.5 & 516.5 (shocks & vibrations), IP65 seal rating EN 301489-17 & EN 61000-6-2 (CEM), E-marked (2004/104)
- Environment:
- Operating temperature: -25°C to +70°C (HR 0-99%), storage: -40°C to +80°C