Industriële seriële interface naar WiFi omvormer, WLg-IDA/S

Industriële seriële naar WiFi omvormer met een RS232, RS422 en RS485 interface met ondersteuning voor Modbus-protocollen. De wifi-modules gebruiken de 2,4GHz of 5GHz frequentieband.

Lees meer

Product varianten

Artikelnummer Productnaam
0103-2319-2309-02 + WLg-IDA/S + Vraag offerte aan
WiFi RS232/RS422/RS485 serial device server voor industriële automatisering


WLg-IDA/S gives access to any serial equipments from Windows, UNIX & Linux computers connected to your WiFi Ethernet TCP/IP network, make it possible to communicate between two distant serial equipments through the network, or directly with a peer to peer connection (Ad-Hoc mode). WLg-IDA/S is designed for industrial and transportation applications, it can be used for material handling, real-time information transmission, and inventory management.

The configuration of the device is achieved using the web browser installed on your computer; it also offers SNMP administration / configuration and an optional C-Key which allows quick and easy on-site replacement of the WLg-IDA/S unit, eliminating the need to reconfigure the replacement part or to use any other equipment.

WLg-IDA/S fulfils the most severe requirements in terms of operating environment: operating temperature from -25°C to +70°C, shock and vibration proof according to MIL-STD-810F standard, IP30 seal rating.

  • Serial RS232 / RS422 / RS485 full duplex up to 250 Kbps
  • 9-36 VDC wide range power supply
  • IEEE 802.11 a/b/g/h WiFi radio (2.4 / 5 GHz)
  • Shock & vibration proof IP30 metal enclosure, DIN rail or panel mounting
  • Point to Point (virtual cable) & multipoint modes, virtual COM port redirector (ViP)
  • TCP Client / Server, UDP & MODBUS/TCP support


Serial link:
Full RS232 / 422 / 485 serial interface, 250 Kbps
RS signals available:
  • RS232 mode: TxD, RxD, RTS, DTR, CTS, DCD, DSR, RI
  • RS422/485 mode: -Tx, +Tx, -Rx, +Rx (+RX and –RX signals can be polarized with jumpers)
  • SUB D9 male connector for RS signals
  • 5-point removable terminal block for RS422/485
WiFi network:
Compliant to the IEEE 802.11a/b/g/h 2.4/5 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h network
Radio data rate:
Up to 108 Mbps (Super AG mode)
13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode)
Output power:
Transmitter +20 dBm (TPC)
Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b
Two 2 dBi bi-band external antennas, RP-SMA connector
64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS)
TCP Client/Server, DHCP Client, TELNET RFC2217 extension, Telnet Server, COM port re-director (VIP), multipoint or point to point virtual link over UDP modes and MODBUS/TCP Client/Server, MODBUS/RTU & MODBUS/ASCII protocols, direct communication
Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...), SNMP agent, ACKSYS NDM, TELNET from the serial link
Operating systems:
Windows, Linux, UNIX as well as any operating system supporting TCP/IP
Relay output warning: power failure, WLAN connection failure, Watchdog. 1 FORM B solid state relay, 60V 0.15A, contacts on removable clamp cage terminal
Power supply:
Dual input, +9 to +36VDC
4.5 Watts typical
Dimensions & weight:
Shockproof & vibration proof metal enclosure (L: 110 x W: 50 x H: 120 mm), 550 g
MIL-STD-810F, 514.5 & 516.5 methods (shocks & vibrations) EN 301489-17 & EN 61000-6-2 (CEM)
Operating temperature: -25°C to +70°C (-4°F to 158°F), storage: -65°C to +100°C (-85°F to 212°F), Humidity: 5% to 95% (non-condensing), IP 30 seal rating

Heeft u een aanvraag?

Type aanvraag
Art. Nr. Productnaam Verwijderen

Heeft u een aanvraag?