1x S0 impuls naar multi mode glasvezel omvormer, IOL3400
De IOL3400 modules worden gebruikt voor de uni directionele transmissie van een S0-impulsuitgang van energiemeters via multimode (MM) glasvezel. BIDI-technologie betekent dat er slechts één vezel nodig is voor het verzenden en ontvangen van de gegevens.
Product varianten
| Artikelnummer | Productnaam | |
|---|---|---|
| 0340001321 + 034002321 + | IOL-3400/TRX-1S0-13-MM-ST | + Vraag offerte aan |
| IOL3400, transmitter + receiver, 1x S0 IN, 1x digitaal relais OUT, ST, via multi mode glasvezel | ||
| 0340001323 + 034002323 + | IOL-3400/TRX-1S0-13-MM-SC | + Vraag offerte aan |
| IOL3400, transmitter + receiver, 1x S0 IN, 1x digitaal relais OUT, SC, via multi mode glasvezel | ||
| 0340001323-BIDI-A + 034002323-BIDI-B + | IOL-3400/TRX-1S0-13-MM-SC-BIDI | + Vraag offerte aan |
| IOL3400, transmitter + receiver, 1x S0 IN, 1x digitaal relais OUT, SC-BIDI, via multi mode glasvezel | ||
| 0340001325 + 034002325 + | IOL-3400/TRX-1S0-13-MM-E2000 | + Vraag offerte aan |
| IOL3400, transmitter + receiver, 1x S0 IN, 1x digitaal relais OUT, E2000, via multi mode glasvezel | ||
Beschrijving
With the fiber optic system IOL3400 the signals of one S0 pulse output can be extended by fiber optic cable (FOC). The system consists of a transmitting device IOL3400-TX and a receiving device IOL3400-RX that are connected via a simplex or duplex optical fiber connector. For transmission of the pulses only a simplex FOC is required. In this case interruptions of the light signal will be displayed only on the IOL3400-RX and signaled via its fault relay contact. By using a duplex fiber optic cable also the IOL3400-TX can show a problem of the fiber optic connection and signal it via its fault relay contact.
Specificaties
- FO-connector:
- ST, SC, E2000 or SC-BIDI
- Fiber type:
- Multimode 62,5 (50)/125µm
- Optical budget:
- 13 dB
- FO range:
- 5 km (1 dB/km)
- Wavelength:
- 1300 nm (1300/1550 nm for BIDI version
- Signal input:
- acc. to EN62053-31, Class A or Class B depending on IOL-3400 Power supply
- Signal output:
- acc. to EN62053-31
- Cable length:
- 1m
- Failure relay:
- 24 VDC (1A) / 60 VDC (0,3 A)
- LED indication:
- Power supply (green) / Data (yellow) / Status (red)
- Power supply:
- 12–30 VDC
- Power consumption:
- 2,5 Watts, 100 mA (24 V)
- Operating temperature:
- –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
- EMC:
- EN61000-6-2 / EN55022 Class B + A1 + A2
- Weight:
- 150 g
- Dimensions:
- 22,5 x 93 x 82 mm
- Housing:
- Polyamid, black