010007981

MODBUS redundant naar singlemode omvormer, DL485-MBR

De DL-485-MBR is een MODSBUS naar singlemode glasvezel omvormer om een redundant MODBUS network te realiseren. Als adapter kun je een keuze maken uit ST of SC.

Lees meer

Product varianten

Artikelnummer Productnaam
010007981 + DL-485-MBR/2x13-SM-ST MBR/SM/Ring + Vraag offerte aan
DL-485-ST, MODBUS omvormer voor verbindingen over singlemode glasvezel met ST adapter.
010007983 + DL-485-MBR/2x13-SM-SC MBR/SM/Ring + Vraag offerte aan
DL-485-SC, MODBUS omvormer voor verbindingen over singlemode glasvezel met SC adapter.

Beschrijving

The fiber optic systems DL485-MBR secure the optical data transfer within MODBUS networks up to a data speed of 115,2 KBit/s. Our special multifunctional fiber optic system allows the construction of optical ring structures.

The system of this series is especially suitable for applications with strict safety-related requirements as for instance: process industry, tunnel ventilation systems and railway technology.

LEDs and potential-free contacts of a fault detector relay are able to signal defective states.

FiberView works similarly to a traffic light. If the “traffic light” is green, everything is fine. If the yellow LED lights, the budget is still tolerable, but already below a certain system reserve. Additionally to the LED, this pre-warning level is also signaled by a potential-free contact. If the “traffic light” turns red there is a serious error.

Specificaties

FO-connector:
ST or SC
Fiber type:
Singlemode 9/125 μm
Optical budget:
16 dB
FO range:
0 km, others up to 100 km on request (0.3 dB/km)
Wavelength:
1310 nm (1310/1550 nm for BIDI version)
Data rate:
9,6 KBit/s, 19,2 KBit/s, 38,4 KBit/s, 57,6 KBit/s oder 115,2 KBit/s
Transmission type:
Half duplex
Terminating resistor:
Switchable: none or wave impedance (Rw + Rpd + Rpu)
RS485 Cable length:
1200m
RS485 connector:
9-pole Sub-D female and 6-pole terminal
Status-LEDs:
Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
Power supply:
12 - 30 VDC, other voltages on request
Power consumption:
5 Watt, 200 mA (24 V)
Galvanic isolation:
500 VDC (24 VDC <> RS485)
Operating temperature:
-40°C to +70°C (Multimode and Singlemode with ST or SC), -20°C to +55°C (all others)
EMC:
EN61000-6-2/EN55022 Class B + A1 + A2
Weight:
570 g
Dimensions:
H: 115 mm, W: 61 mm, D: 113 mm
Housing:
Stainless steel, powder coated

Heeft u een aanvraag?

Type aanvraag
Art. Nr. Productnaam Verwijderen

You can add another variation to your request

Heeft u een aanvraag?