010007571

CAN-bus naar Multimode omvormer, DL-CAN-R

De DL-CAN-R-modules verbinden CAN veldbusnetwerken (bijv. CAN, CANopen, DeviceNet) via multimode glasvezelmet elkaar. Met behulp van dit innovatieve systeem is een optisch redundant ringnetwerk mogelijk. Deze modules zijn uitgerust met FiberView. De "verkeerslicht" LED's geven u een indicatie van de kwaliteit van de glasvezelverbinding.

Lees meer

Product varianten

Artikelnummer Productnaam
010007571 + DL-CANR/2x13-MM-ST CAN/MM/Ring + Vraag offerte aan
CAN-bus to Multimode converter for a redundant ring network, ST adapter.
010007573 + DL-CANR/2x13-MM-SC CAN/MM/Ring + Vraag offerte aan
CAN-bus to Multimode converter for a redundant ring network, SC adapter.
010007573-BIDI + DL-CANR/2x13-MM-SC-BIDI CAN/MM/Ring + Vraag offerte aan
CAN-bus to Multimode converter for a redundant ring network, SC-BIDI adapter.

Beschrijving

The systems DL CAN connect CAN field bus networks (e.g. CAN, CANopen, DeviceNet) via fiber optics. The special multifunctional fiber optic system DL CAN-R also allows the construction of optical ring structures.

LEDs and potential-free contacts of a fault detector relay are able to signal defective states.

FiberView works similarly to a traffic light. If the “traffic light” is green, everything is fine. If the yellow LED lights, the budget is still tolerable, but already below a certain system reserve. Additionally to the LED, this pre-warning level is also signaled by a potential-free contact. If the “traffic light” turns red there is a serious error.

Specificaties

FO-connector:
ST, SC or SC-BIDI
Fiber type:
Multimode 62,5 (50)/125µm
Optical budget:
12 dB
FO range:
5 km (1 dB/km)
Wavelength:
1310 nm (1310/1550 nm for BIDI version)
Data rate:
10, 20, 22,2, 50, 100, 125, 250, 500, 800, 1000 KBaud Switchable: none or wave impedance (Rw + Rpd + Rpu)
Transmission type:
Half duplex
Indentifier:
11 Bit, 29 Bit or both
Terminating resistor:
Switchable: none or wave impedance (Rw + Rpd + Rpu)
CAN cable length:
Acc. to CAN Specification
CAN connector:
9-pole Sub-D female and 6-pole terminal
Status LEDs:
Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
Power supply:
12 to 30 VDC, other voltages on request
Power consumption:
5 Watts, 200 mA (24 V)
Galvanic isolation:
500 VDC (24 VDC <> CAN)
Operating temperature:
-40°C to +70°C (Multimode and Singlemode with ST or SC) / -20°C to +55°C (all others)
EMC:
EN61000-6-2/EN55022 Class B + A1 + A2
Weight:
570 g
Dimensions:
60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing:
Stainless steel, powder coated

Heeft u een aanvraag?

Type aanvraag
Art. Nr. Productnaam Verwijderen

Heeft u een aanvraag?