01000 6621

RS485 4-wire naar multimode omvormer, DL485-4W

De DL485-4W is een RS485 4-draads naar multimode glasvezel omvormer voor point-to-point verbindingen. Voor de adapter kunt u kiezen uit ST, SC of SC-BIDI. BIDI-technologie betekent dat u slechts één glasvezel nodig heeft voor het verzenden en ontvangen van data.

Lees meer

Product varianten

Artikelnummer Productnaam
01000 6621 + DL-485-4W/13-MM-ST RS485/4-wire/MM + Vraag offerte aan
DL485-ST, RS485 4-wire omvormer voor point-to-point verbindingen over multimode glasvezel
01000 6623 + DL-485-4W/13-MM-SC RS485/4-wire/MM + Vraag offerte aan
DL485-SC, RS485 4-wire omvormer voor point-to-point verbindingen over multimode glasvezel
01000 6623-BIDI-A + DL-485-4W/13-MM-SC-BIDI RS485/4-wire/MM + Vraag offerte aan
DL485-SC-BIDI, RS485 4-wire omvormer voor point-to-point verbindingen over multimode glasvezel
01000 6623-BIDI-B + DL-485/13-MM-SC-BIDI-B RS485/MM/PzP/FiberView + Vraag offerte aan
DL485-SC-BIDI, RS485 4-wire omvormer voor point-to-point verbindingen over multimode glasvezel

Beschrijving

The fiber optic systems DL485 connect field bus systems with RS485 interfaces. Optical linking allows safe data transfer and is suitable for MODBUS, MODNET-1/SFB, BIT-BUS, SAIA-S-BUS and several manufacturer-specific systems.

The fiber optic systems DL485-4W connect field bus systems with RS485 four-wire interfaces.

With the help of this innovative system optical bus, star, tree and mixed structures are possible.

LEDs and potential-free contacts of a fault detector relay are able to signal defective states.

FiberView works similarly to a traffic light. If the “traffic light” is green, everything is fine. If the yellow LED lights, the budget is still tolerable, but already below a certain system reserve. Additionally to the LED, this pre-warning level is also signaled by a potential-free contact. If the “traffic light” turns red there is a serious error. fiber optic systems DL485 connect field bus systems with RS485 interfaces. Optical linking allows safe data transfer and is suitable for MODBUS, MODNET-1/SFB, BIT-BUS, SAIA-S-BUS and several manufacturer-specific systems.

Specificaties

Data rate:
1200 Bit/s to 3MBit/s
Transmission type:
Half duplex
FO-connector:
ST, SC or SC-BIDI
Fiber type:
Multimode 62,5 (50)/125 μm
Optical budget:
12 dB
FO range:
5 km (1 dB/km)
Wavelength:
1310 nm (1310 nm 1550 nm for BIDI)
Terminating resistor:
Switchable: none or wave impedance (Rw + Rpd + Rpu)
RS485 Cable length:
1200 m (9.6–93.75 KBit/s), 250 m (500 KBit/s), 90 m (1.5 MBit/s)
RS485 Connector:
9-pole Sub-D female and 6-pole terminal
Status-LEDs:
Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
Power supply:
12–30 VDC, other voltages on request
Power consumption:
5 Watt, 200 mA (24 V)
Galvanic isolation:
500 VDC (24 VDC <> RS485)
Operating temperature:
–40 °C – +70 °C (Multimode and Singlemode with ST or SC), –20 °C – +55 °C (all others)
EMC:
EN61000-6-2/EN55022 Class B + A1 + A2
Weight
570 g
Dimensions:
60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing:
Stainless steel, powder coated

Heeft u een aanvraag?

Type aanvraag
Art. Nr. Productnaam Verwijderen

Heeft u een aanvraag?