M-Bus repeater, BIALON MRPT-60
Met de BIALON-MRPT-60 M-Bus-repeater kun je het aantal apparaten vergroten om aan het M-Bus netwerk te koppelen.
Me de repeater kan ook de bus lengte van het M-Bus systeem worden vergroot. Aan de actieve kant kunnen tot 60 M-Bus eindpunten
(elk met een standaard belasting van 1,5 mA) worden aangesloten.
Product varianten
Artikelnummer | Productnaam | |
---|---|---|
095166 + | BIALON MRPT‐60 230Vac | + Vraag offerte aan |
M‐Bus repeater for 60 M‐Bus devices, galvanic isolation, power supply 230Vac | ||
095167 + | BIALON MRPT‐60 24Vac/dc | + Vraag offerte aan |
M‐Bus repeater for 60 M‐Bus devices, galvanic isolation, power supply 24Vac/dc |
Beschrijving
The BIALON-MRPT-60 M-Bus repeater lets you increase the number of devices that can be connected to the M-Bus system, and extend the maximum bus length. On the active side, up to 60 M-Bus endpoints (each with a standard load of 1.5 mA) can be connected.
The M-Bus repeater features overload protection and is thus short-circuit protected. The trip threshold is 110 mA. Additionally, the M-Bus interface has overvoltage protection on the bus side.
The LEDs indicate the major operational and malfunction states, such as power supply, send or receive data, and bus overload.
The BIALON MRPT-60 M-Bus repeater is available in two variants with a 230 V AC or 24 V AC/DC power supply.
Specificaties
- M-Bus repeater:
- Up to 60 M-Bus endpoints (standard load: 1.5 mA)
- Supply voltage:
- 110 V to 250 V AC or 20 V to 28 V AC/DC
- M-Bus voltage:
- 36 V - 42 V
- max. M-Bus idle current:
- 90 mA (60 standard loads)
- over current threshold:
- <110 mA
- Electrical isolation:
- between the M-Bus channels (active and passive sides)
- M-Bus transfer rate:
- 300 … 9600 baud
- LED indication:
-
- LED green: power on
- LED yellow: Transmit M-Bus
- LED green: Receive M-Bus
- LED red: Bus Overload
- M-Bus (active) connection:
- 4 separate terminal pairs max. 2.5 mm²
- M-Bus (passive) connection:
- Terminal pairs max. 2.5 mm²
- Operating temperature:
- 0 ... 40 °C
- Relative humidity:
- 0 ... 90 % (non-condensing)
- Housing:
- In accordance with EN 50022 for installation on DIN-rails, 6 devision units
- Degree of protection:
- IP 20
- Dimensions:
- 108 x 90 x 66 mm (6 TE)