095250
S0 impuls teller naar M-Bus omvormer , BIALON MB-10S0
Productgroep
De M-Bus naar S0-omzetter, BIALON MB-10S0, wordt gebruikt voor het aansluiten van verbruiksmeters met een S0-interfaces op het M-Bus-systeem. De meterpulsen die door de S0-meters zijn verkregen, worden geaggregeerd in de MB-10S0-module en op aanvraag verstuurt via de M-bus.
Product varianten
Artikelnummer | Productnaam | |
---|---|---|
095250 + | BIALON MB ‐10S0 230Vac | + Vraag offerte aan |
10 S0 impulse counter, M‐Bus interface, power supply 230Vac | ||
095251 + | BIALON MB ‐10S0 24Vac/dc | + Vraag offerte aan |
10 S0 impulse counter, M‐Bus interface, power supply 24Vac/dc |
Beschrijving
The M-Bus S0 converter BIALON MB-10S0 is used for connecting consumption meters with S0 interfaces to the M-Bus system. The meter pulses acquired by the S0 meters are aggregated in the MB-10S0 module and provided on the M-Bus on request. The value of the S0 pulse inputs can be freely configured on the M-Bus. The parameters are stored in the internal, non-volatile memory. In case of a power supply outage, the S0 meter data are stored in non-volatile memory (EEPROM).
- M-BUS pulse acquisition module with 10 S0 inputs
- Integration of meters with conventional pulse interfaces
- Freely selectable pulse values for S0 inputs
- Flexible configuration via the M-Bus
- Meter data are stored in case of power outage
- Baud rates 300, 2400, 9600 baud
- M-Bus protocol as per DIN EN13757-2 and 3, (EN1434- 3)
- S0 interface as per DIN_43864
- Primary and secondary address assignment
- Top hat rail installation
Specificaties
- Supply voltage:
- 110 V to 250 V AC or 20 V – 24 V AC/DC
- Inputs:
- 10x S0, as per DIN EN 62053-31
- Remote reading:
- M-BUS
- Data storage:
- min. of 10 years and 10,000 cycles in EEPROM
- Processor:
- Cortex M4 and PIC
- LED indication:
-
- LED green: 10x LED for 10x S0 interface
- LED green: power on LED yellow: Service; write protect
- LED green: Master sending message
- LED yellow: Slave sending messages
- Installation:
- Service TA – remove write protect
- Transmission media:
- Wire pair (M-Bus)
- Operatng temperature:
- 0 ... 40°C
- Relative humidity:
- 0 ... 90 % (non-condensing)
- Housing:
- as per EN 50022 for installation on DIN support rails, 6 TE
- Protection type:
- IP20
- Dimensions (L x W x H):
- 108 x 90 x 66 mm (6 TE)