RS232 naar RS422/RS485 omvormer, K2
De K2 en K2-TB zijn mini RS232 naar RS422/RS485 omvormers. Ze worden gevoed via de RTS- en DTR-signalen van de RS232 sub-D9 poort. Aan de RS422/RS485 kant bevindt zich een sub-D9 of schroefklemmenblok aansluiting.
Product varianten
Artikelnummer | Productnaam | |
---|---|---|
1111-01-1102-00 + | K2 | + Vraag offerte aan |
RS232<>RS422/485 coverter 9/9 pole sub-D | ||
1111-01-1102-01 + | K2-TB | + Vraag offerte aan |
RS232<>RS422/485 coverter 9 pole sub-D/TB Connector |
Beschrijving
The K2 is a non-isolated RS232 to RS422 or RS485 converter for 0-115200 baud. It is primarily for RS232 to RS422 conversion. For RS485 use, RTS Control is required from the RS232 device. The K2 can also act as a Master on a 4-wire "RS485" bus. The K2 has a DB9 female connector at both ends.
- RS232 port-powered in most applications
- Very low supply current
- RS232 output swings above and below ground, for maximum compatibility
- Sony professional compatible (also known as SMPTE) RS422 pinout
The K2-TB is a non-isolated RS232 to RS422 or RS485 converter for 0-115200 baud. It is primarily for RS232 to RS422 conversion. For RS485 use, RTS Control is required from the RS232 device. The K2-TB can also act as a Master on a 4-wire "RS485" bus. The K2-TB has a DB9 female connector at the RS232 port and a 5-way removable terminal block at the RS422 or RS485 port.
- RS232 port-powered in most applications
- Very low supply current
- RS232 output swings above and below ground, for maximum compatibility
Specificaties
- Serial parameters:
- 0-115200 baud, any character format including break levels
- RS232 interface:
- RX threshold +1,5V typ.
- RS422/RS485 interface:
- RX threshold 200mV typ. (defferential) Max. common-mode voltage -7V to +12V
- Supply current:
- 2mA (12kohm load)
- Supply voltage:
- RTS & DTR RS232 port or +6 to +16VDC on pin 9
- RS232 connector:
- Sub-D 9 pole female
- RS422/RS485 connector:
- K2: Sub-D 9 pole female K2-TB: Screw terminal block
- CE compliance:
- Emissions EN50081-2, imminity EN50082-2
- Operating temperature:
- 0°C to +50°C, RH 0 to 90% non-condensing
- Dimensions:
- 34mm (w) x 17mm (h) x 62mm (l)