0414-ZR-TIDCI-OPT1-EM

ZigBee S0 optische inaterface voor energiemeter, ZR-TIDCI-OPT1-EM

Productgroep

ZigBee S0 optische interface voor energiemeters.

Lees meer

Product varianten

Artikelnummer Productnaam
0414-ZR-TIDCI-OPT1-EM + ZR-TIDCI-OPT1-EM + Vraag offerte aan
ZigBee S0 optische interface energiemeter

Beschrijving

The ZR-TIDCI-OPT1-EM counts, stores and transmits to a Gateway optical pulses generated by a counter ENEL, which correspond to a certain energy measured by the latter. The energy per pulse is set from 1 to 99 Wh. It is also supplied with a generic digital input that can be used to transfer a state of alarm coming from outside (with contact). The internal energy meter with resolution in Wh can be reset or set to a desired value to synchronize with the ENEL energy meter. The counts are transmitted on a regular basis and to a programmable Gateway. The device must be continuously powered to 12-24 Vdc / Vac (power supply included); it can also act as a repeater and or a parent device for battery-powered sensors.

Key features:

  • LED pulse counter of electricity and energy meter settable from 1 to 99 Wh/pulse
  • It manages electricity and energy meter in Wh
  • Digital input for remote alarms
  • Compatible with ENEL energy meter (single phase/three phase); other European energy meters under development

Specificaties

General specifications:
  • Chip Ember EM250
  • Compatible IEEE 802.15.4
  • Stack EmberZnet 3.5.x (ZigBee PRO)
  • Modbus/RTU
  • Device address settable via internal dip-switch
  • Wall mounting with screws Cable gland: PG9
RF characteristics:
  • Frequency: 2405 MHz ÷ 2480 MHz
  • Modulation: DSSS
  • Nominal transmission power: 10mW (10 dBm)
  • Receiver sensitivity: -97 dBm
  • External antenna gain: 5,5 dB
  • Range outdoor/indoor: 200m/50m
Power supply:
12-24 Vdc/Vac; 100mA; 50/60Hz Power supply included 230 Vac (±20%); 50/60Hz
Digital input:
  • Electronic type not insulated inputs for clean contact
  • Short circuit current 0,01mA. Use self-cleaning contacts.
Connections:
Pull out terminals (3,81 mm pitch)
Environment parameters:
  • Operating temperature: -10 ÷ +60°C; <80% U.R. not condensing
  • Storage temperature: -20 ÷ +70°C; <80% U.R. not condensing
  • Degree of protection: IP 55
Conformity:
  • Community Directives 2006/95/EEC, 89/336/EEC, 99/5/EEC
  • ETSI-EN 300 328; ETSI EN301 489; EN 50371
  • EN60950-1; EN61000-6-2; EN61000-6-3
  • Immunity; EN 60950-1: Electric Safety

Heeft u een aanvraag?

Type aanvraag
Art. Nr. Productnaam Verwijderen

Heeft u een aanvraag?