CAN-bus to Multimode converter, DL-CAN-2x
De DL-CAN-2x-modules verbinden CAN veldbusnetwerken (bijv. CAN, CANopen, DeviceNet) via multimode glasvezel met elkaar. Met behulp van dit innovatieve systeem zijn een optische bus, ster, boom en gemengde netwerk structuren mogelijk. Deze modules zijn uitgerust met FiberView. De "verkeerslicht" LED's geven u een indicatie van de kwaliteit van de glasvezelverbinding.
Product varianten
Artikelnummer | Productnaam | |
---|---|---|
010007471-FV + | DL-CAN/2x13-MM-ST CAN/MM/Star/FiberView | + Vraag offerte aan |
CAN-bus naar Multimode omvormer voor lijn, ster of boom verbinding, ST adapter. | ||
010007473-FV + | DL-CAN/2x13-MM-SC CAN/MM/Star/FiberView | + Vraag offerte aan |
CAN-bus naar Multimode omvormer voor lijn, ster of boom verbinding, SC adapter. | ||
010007473-BIDI-FV + | DL-CAN/1x13-MM-ST-BIDI CAN/MM/Star/FiberView | + Vraag offerte aan |
CAN-bus naar Multimode BIDI omvormer voor lijn, ster of boom verbinding, SC adapter. |
Beschrijving
The DL CAN systems connect CAN field bus networks (e.g. CAN, CANopen, DeviceNet) via fiber optics. With the help of this innovative system, optical bus, star, tree and mixed structures are possible.
LEDs and potential-free contacts of a fault detector relay are able to signal defective states.
FiberView works similarly to a traffic light. If the “traffic light” is green, everything is fine. If the yellow LED lights, the budget is still tolerable, but already below a certain system reserve. Additionally to the LED, this pre-warning level is also signaled by a potential-free contact. If the “traffic light” turns red there is a serious error.
Specificaties
- FO-connector:
- ST, SC or SC-BIDI
- Fiber type:
- Multimode 62,5 (50)/125µm
- Optical budget:
- 12 dB
- FO range:
- 5 km (1 dB/km)
- Wavelength:
- 1310 nm (1310/1550 nm for BIDI version)
- Data rate:
- 10, 20, 22,2, 50, 100, 125, 250, 500, 800, 1000 KBaud Switchable: none or wave impedance (Rw + Rpd + Rpu)
- Transmission type:
- Half duplex
- Indentifier:
- 11 Bit, 29 Bit or both
- Terminating resistor:
- Switchable: none or wave impedance (Rw + Rpd + Rpu)
- CAN cable length:
- Acc. to CAN Specification
- CAN connector:
- 9-pole Sub-D female and 6-pole terminal
- Status LEDs:
- Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
- Power supply:
- 12 to 30 VDC, other voltages on request
- Power consumption:
- 5 Watts, 200 mA (24 V)
- Galvanic isolation:
- 500 VDC (24 VDC <> CAN)
- Operating temperature:
- -40°C to +70°C (Multimode and Singlemode with ST or SC) / -20°C to +55°C (all others)
- EMC:
- EN61000-6-2/EN55022 Class B + A1 + A2
- Weight:
- 570 g
- Dimensions:
- 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
- Housing:
- Stainless steel, powder coated