CAN-bus naar POF of HCS fiber optic omvormer, DL-CAN-2x
De DL-CAN-2x modules verbinden CAN veldbusnetwerken (bijvoorbeeld CAN, CANopen, DeviceNet) via POF (Plastic Optical Fibre) of HCS (Hard Clad Silica) glasvezel met elkaar. Met behulp van dit innovatieve systeem zijn optische bus, ster, boom en gemengde structuren mogelijk.
Product varianten
Artikelnummer | Productnaam | |
---|---|---|
010007451 + | DL-CAN/1x13-POF-ST CAN/POF/Star | + Vraag offerte aan |
CAN-bus naar POF fiber optic omvormer voor een lijn, ster of boom structuur netwerk, ST adapter. | ||
010007462 + | DL-CAN/1x13-HCS-ST CAN/HCS/Star | + Vraag offerte aan |
CAN-bus naar HCS fiber optic omvormer voor een lijn, ster of boom structuur netwerk, ST adapter. |
Beschrijving
The DL CAN systems connect CAN field bus networks (e.g. CAN, CANopen, DeviceNet) via fiber optics. With the help of this innovative system, optical bus, star, tree and mixed structures are possible.
LEDs and potential-free contacts of a fault detector relay are able to signal defective states.
FiberView works similarly to a traffic light. If the “traffic light” is green, everything is fine. If the yellow LED lights, the budget is still tolerable, but already below a certain system reserve. Additionally to the LED, this pre-warning level is also signaled by a potential-free contact. If the “traffic light” turns red there is a serious error.
Specificaties
- FO-connector:
- ST
- Fiber type:
- POF 980/1000µm/HCS200/230µm
- Optical budget:
- 12 dB
- FO range:
- POF 50m (180 dB/km) / HCS 200m (180 dB/km)
- Wavelength:
- POF 650nm / HCS 850nm
- Data rate:
- 10, 20, 22,2, 50, 100, 125, 250, 500, 800, 1000 KBaud Switchable: none or wave impedance (Rw + Rpd + Rpu)
- Transmission type:
- Half duplex
- Indentifier:
- 11 Bit, 29 Bit or both
- Terminating resistor:
- Switchable: none or wave impedance (Rw + Rpd + Rpu)
- CAN cable length:
- Acc. to CAN Specification
- CAN connector:
- 9-pole Sub-D female and 6-pole terminal
- Status LEDs:
- Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
- Power supply:
- 12 to 30 VDC, other voltages on request
- Power consumption:
- 5 Watts, 200 mA (24 V)
- Galvanic isolation:
- 500 VDC (24 VDC <> CAN)
- Operating temperature:
- -40°C to +70°C (Multimode and Singlemode with ST or SC) / -20°C to +55°C (all others)
- EMC:
- EN61000-6-2/EN55022 Class B + A1 + A2
- Weight:
- 570 g
- Dimensions:
- 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
- Housing:
- Stainless steel, powder coated