Profibus naar POF of HCS omvormer, DL485-PBR
De DL485-PBR is een Profibus naar POF of HCS fiber optic omvormer voor het realiseren van een redundant ring netwerk.
Product varianten
Artikelnummer | Productnaam | |
---|---|---|
010006351 + | DL-485PBR/13-POF-ST RS485/Profibus/POF/Ring/FiberView | + Vraag offerte aan |
DL-485PBR-ST, Profibus omvormer voor ring verbindingen over POF fiber optic. | ||
010006362 + | DL-485PBR/13-POF-ST RS485/Profibus/HCS/Ring/FiberView | + Vraag offerte aan |
DL-485PBR-ST, Profibus omvormer voor ring verbindingen over HCS fiber optic. |
Beschrijving
The special multifunctional fiber optic system DL485-PBR also allows the construction of optical ring structures. The system of this series is especially suitable for applications with strict safety-related requirements as for instance: process industry, tunnel ventilation systems and railway technology.
LEDs and potential-free contacts of a fault detector relay are able to signal defective states.
FiberView works similarly to a traffic light. If the “traffic light” is green, everything is fine. If the yellow LED lights, the budget is still tolerable, but already below a certain system reserve. Additionally to the LED, this pre-warning level is also signaled by a potential-free contact. If the “traffic light” turns red there is a serious error.
Specificaties
- FO-connector:
- ST
- Fiber type:
- POF 980/1000µm/HCS200/230µm
- Optical budget:
- 12 dB
- FO range:
- POF 50m (180 dB/km) / HCS 200m (180 dB/km)
- Wavelength:
- POF 650nm / HCS 850nm
- Data rate:
- 12 MBit/s
- Transmission type:
- Half duplex
- Signal delay:
- RS485 <> LWL: < 3 TBit / Tx <> Rx: 11 TBit
- Terminating resistor:
- Switchable: none or wave impedance (Rw + Rpd + Rpu)
- RS485 cable length:
- 1200 m (9,6 - 187,5 KBit/s), 400 m (500 KBit/s), 200 m (1,5 MBit/s), 100 m (3 MBit/s-12 MBit/s)
- RS485 connector:
- 9-pole Sub-D female and 6-pole terminal
- Status LEDs:
- Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
- Power supply:
- 12 to 30 VDC, other voltages on request
- Power consumption:
- 5 Watts, 200 mA (24 V)
- Galvanic isolation:
- 500 VDC (24 VDC <> RS485)
- Operating temperature:
- -40°C to +70°C (Multimode and Singlemode with ST or SC) / -20°C to +55°C (all others)
- EMC:
- EN61000-6-2/EN55022 Class B + A1 + A2
- Weight:
- 570 g
- Dimensions:
- 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
- Housing:
- Stainless steel, powder coated