01000 2131
RS422 naar singlemode glasvezel omvormer, DL422
Productgroep
De DL422 is een RS422 4-draads naar singlemode glasvezelconverter voor point-to-point verbindingen. Voor adapter kunt u de keuze maken tussen ST, SC, E2000 of SC-BIDI. BIDI-technologie betekent dat u slechts één glasvezel nodig heeft voor het verzenden en ontvangen van de gegevens.
Product varianten
Artikelnummer | Productnaam | |
---|---|---|
01000 2131 + | DL-422/13-SM-ST RS422/MM/PzP/FiberView | + Vraag offerte aan |
DL422-ST, RS422 4-wire omvormer voor for point-to-point verbindingen over singlemode glasvezel | ||
01000 2133 + | DL-422/13-SM-SC RS422/MM/PzP/FiberView | + Vraag offerte aan |
DL422-SC, RS422 4-wire omvormer voor for point-to-point verbindingen over singlemode glasvezel | ||
01000 2133-BIDI-A + | DL-422/13-SM-SC-BIDI-A RS422/MM/PzP | + Vraag offerte aan |
DL422-SC-BIDI-A, RS422 4-wire omvormer voor point-to-point verbindingen over singlemode glasvezel (te bestellen in combinatie met BIDI-B) | ||
01000 2133-BIDI-B + | DL-422/13-SM-SC-BIDI-B RS422/MM/PzP | + Vraag offerte aan |
DL422-SC-BIDI-B, RS422 4-wire omvormer voor point-to-point verbindingen over singlemode glasvezel (te bestellen in combinatie met BIDI-A) | ||
010002135 + | DL-422/13-SM-E2000 RS422/MM/PzP/FiberView | + Vraag offerte aan |
DL422-E2000, RS422 4-wire omvormer voor for point-to-point verbindingen over singlemode glasvezel |
Beschrijving
The fiber optic systems DL422 connect applications with a RS422 4-wire interface via fiber optics. With the help of this innovative system optical bus, star, tree and mixed structures are possible. LEDs and potential-free contacts (optional) of a fault detector relay are able to signal defective states.
Specificaties
- Data rate:
- Point-to-point structure: 1.5 MBit/s max. / Line topology: 1.5 MBit/s divided by no. of DL422 systems
- Transmission type:
- Duplex
- FO-connector:
- ST, SC, E2000 or SC-BIDI
- Fiber type:
- Singlemode 9/125µm
- Optical budget:
- 16 dB
- FO range:
- 30 km, others up to 100 km on request (0,3 dB/km)
- Wavelength:
- 1310 nm (1310 nm 1550 nm for BIDI)
- Terminating resistor:
- Switchable: none or wave impedance (Rw + Rpd + Rpu)
- RS485 Cable length:
- 50 m
- RS422 Connector:
- 9-pole Sub-D female and 6-pole terminal
- Status-LEDs:
- Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
- Power supply:
- 12 - 30 VDC, other voltages on request
- Power consumption:
- 5 Watt, 200 mA (24 V)
- Galvanic isolation:
- 500 VDC (24 VDC <> RS422)
- Operating temperature:
- -40°C to +70°C (Multimode and Singlemode with ST or SC), -20°C to +55°C (all others)
- EMC:
- EN61000-6-2/EN55022 Class B + A1 + A2
- Weight
- 570 g
- Dimensions:
- 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
- Housing:
- Stainless steel, powder coated