Data-acquisitie analoge/digitale I/O module, DAT3011
De DAT3011 is een module met:
- Type Analoge Input: Universal (RTD 2,3 W) + mA, V
- No. Analoge Inputs: 2
- Type Analoge Output: 0-20mA
- No. Analoge Outputs: 2
- No. Digitale Inputs: 3
- No. Digitale Outputs: 3
- Type Digitale Output: SSD and SPST relay
Ondersteuning van Modbus RTU/Modbus ASCII protocol.
Product varianten
Artikelnummer | Productnaam | |
---|---|---|
0401-DAT3011 + | DAT 3011 | + Vraag offerte aan |
Universal I/O module with RS485 interface, 1 Universal Analogue Input + 1 Analogue Input V/mA - 2 Analogue Outputs 0-20mA - 3 Digital Inputs with pulse counters up to 3 kHz - 1 SSR Digital Output + 2 SPST Relay Outputs |
Beschrijving
The device DAT 3011 is able to acquire RTD or Tc sensors, mV, V or mA input signals connected to the universal analog input. Moreover a second V/mA analog input is available.
The device is able to acquire up to 3 digital inputs and to drive one solid-state relay and two SPST relays.
Data values are transmitted with MODBUS RTU/MODBUS ASCII protocol on the RS-485 network.
By means of a 16 bit converter, the device guarantee a high accuracy and a stable measure versus time and temperature.
To ensure the plant safety, two Watch-Dog timer alarms are provided. The 1500 Vac isolation on all ways (Power Supply / RS485 / Universal input / V-mA input / Digital inputs / Relay outputs) removes eventual ground-loop effects, allowing the use of the device even in the heavy environmental conditions.
Specificaties
- Power supply:
- 10 - 30VDC
- Max. current consumption:
- 100mA @ 24VDC
- Rever. Polarity protection:
- 60VDC max.
- Isolation:
-
- Inputs - RS485
- Power supply - Input
- Power supply - RS485
- Temperature & humidity:
-
- Operating temperature: -10°C ... +60°C
- Storage temperature: -40°C ... +85°C
- Humidity (not condensing): 0 ... 90%
- Housing:
-
- Material: self-extinguishing plastic
- Mounting: DIN-rail
- Dimensions (mm): W x L X H 120 x 100 x 17,5
- IP20
- Weight:
- About 150g
- Input RTD 2 or 3 wires:
-
- Pt100: min -200°C / max 850°C
- Pt1000: min -200°C / max 200°C
- Ni100: -60°C / max 180°C
- Ni1000: -60°C / max 150°C
- Input Resistance 2 or 3 wires:
-
- Low: min 0Ω / max 500Ω
- High: min 0Ω / max 2000Ω
- Potentiometer
- Min. 20Ω / max 50kΩ
- Current 20mA:
- Min. -20mA / max. 20mA
- Accuracy
-
- mV, Volt, mA: ±0.05%fs
- Pot. RTD, Res: ±0.05%fs
- TC: >±0.05%fs or µV
- Linearity:
-
- mV, Volt, mA: ±0.05%fs
- Pot. RTD, Res: ±0.15%fs
- TC: >±0.2%fs
- RTD, Res., Pot. excitation current:
- Typical 0.700mA
- TC
-
- J: min -210°C/max 1200°C
- K: min 210°C/max 1370°C
- R: min -50°C/max 1760°C
- S: min -50°C/max 1760°C
- Thermal drift::
- Full scale: ±0.01%/°C
- Sample time:
- 0.5 ÷ 1 sec.
- Data transmission (asynchr. serial):
-
- Baud rate: 38.4 Kbps
- Max. distance: 1.2Km
- Warm-up time:
- 3 min.