WiFi Bridge, point-to-point, Ethernet Air-Pack-2
De Ethernet-Air-Pack-2 is een kant-en-klare oplossing die is ontworpen om elke Ethernet-kabel tussen apparatuur of netwerken te vervangen. De kit is opgebouwd rond twee vooraf geconfigureerde WiFi modules die al aan elkaar gekoppeld zijn, de installatie vereist geen configuratie.
Product varianten
| Artikelnummer | Productnaam | |
|---|---|---|
| 0103-2319-0501-02 + | Ethernet Air-Pack-2 | + Vraag offerte aan |
| Kant-en-klare Point-to-Point WiFi Ethernet bridge | ||
Beschrijving
Ethernet-Air-Pack-2 is a ready-to-use solution designed to replace any Ethernet cable between equipments (PC, IP video, printers ...), replace the network cable between the RJ45-wall outlet and the computer or even to establish a wireless bridge between two independent Ethernet networks (between two buildings, two PLC's networks ...). The kit is built around two pre-configured WiFi units already associated, installation doesn't require any configuration. Ethernet-Air-Pack-2 relies on the WiFi 5 GHz standard (IEEE 802.11a+n) which is not widely used by WiFi equipments. This offers a good level of protection against perturbations generated by existing WiFi networks; you can install as much Ethernet Air-Pack-2 as cables to be replaced.
- Connection between two equipments or two networks
- Ready to use, nothing to configure
- 5 GHz IEEE 802.11a WiFi band (108 Mbps)
- Secured radio link with pre-configured WPA2
- 10/100/1000 Base TX RJ45 auto-sensing network interface
- DC connector supplied
Specificaties
- Ethernet link:
- 10/100/1000 Base TX Ethernet interface, RJ45 connector
- Radio link:
- 1 radio IEEE 802.11a/b/g/n, MIMO 2T2R, 5 GHz
- Power, sensitivity:
- Receiver : -92 dBm for 802.11 b/g/n and -96 dBm for 802.11a/n
- LED indication:
- Power, LAN & WLAN activity
- Administration:
- SNMP and ACKSYS NDM
- Power supply:
-
- +9VDC to +48VDC, 3-pin Phoenix connector or PoE
- 5.5 Watts typical, 8.5 Watts maximum
- Dimensions:
- Compact case L : 103 x l : 67 x h : 24 mm
- Weight:
- 225 g
- Environment:
-
- IP30 Operating temperature: -20°C to +60°C , storage: -40°C to +85°C
- Humidity: 0% to 99% (non-condensing)