M-Bus interface omvormer, MPW-120/MPW-120D
Met de M-Bus interface omvormer Bialon MPW-120 en de MPW-120D kunnen tot 120 M-Bus apparaten (elk met een standaard belasting van 1,5 mA) via een RS232 of RS485 verbinding op een M-busmaster worden aangesloten. De master van de M-bus kan een PC of een "embedded controller" met een RS232 of RS485 interface zijn. De MPW-120 heeft een RS232-interface, de MPW-120D heeft een RS232 en RS485 interface.
Product varianten
| Artikelnummer | Productnaam | |
|---|---|---|
| 095168 + | BIALON MPW-120 230VAC - RS232 | + Vraag offerte aan |
| M-Bus level omvormer voor 120 M-Bus devices, RS232 interface, power supply 230VAC | ||
| 095169 + | BIALON MPW-120 24VAC/DC - RS232 | + Vraag offerte aan |
| M-Bus level omvormer voor 120 M-Bus devices, RS232 interface, power supply 24VAC/DC | ||
| 095404 + | BIALON MPW-120D 230VAC - RS232/RS485 | + Vraag offerte aan |
| Dualport M-Bus level omvormer voor 120 M-Bus devices, RS485 and RS232 interface, power supply 230VAC | ||
| 095404 + | BIALON MPW-120D 24VAC/DC - RS232/RS485 | + Vraag offerte aan |
| Dualport M-Bus level omvormer voor 120 M-Bus devices, RS485 and RS232 interface, power supply 24VAC/DC | ||
Beschrijving
The M-Bus level converter BIALON MPW-120 and MPW-120D lets you connect up to 120 M-Bus endpoints (with a standard load of 1.5 mA each) to an M-Bus Master via an RS232 or RS485 connection. The M-Bus Master can be, e.g., a PC or an embedded controller. The level converter translates the signals from the M-Bus Master on the RS232 or RS485 interface to M-Bus signals. The M-Bus Master is connected to the level converter via terminals 5 to 7, (TD, RD and GND). The level converter has overload protection and is thus short-circuit protected. The trip threshold is 180 mA. Additionally, the M-Bus interface has overvoltage protection on the bus side. The LEDs indicate the major operational and malfunction states, such as power supply, send or receive data, and bus overload. The M-Bus BIALON MPW-120 or MPW-120D level converter is available in two variants with a 230VAC or 24VAC/DC power supply.
Specificaties
- Supply voltage:
- 110V to 250VAC or 20V to 28VAC/DC
- M-Bus voltage:
- 36 V to 42 V
- max. M-Bus idle current:
- 200 mA (120 standard loads)
- Over cuurent threshold:
- 180 mA
- Electrical isolation:
- between RS232/RS485 and M-Bus
- Transfer rate:
- 300 - 9600 baud
- LED indication:
-
- LED green/yellow: Transmit/ Receive M-Bus
- LED green: power
- LED red: Bus overload
- M-Bus connection:
- Terminal pairs max. 2.5 mm²
- RS232/RS485 connection:
- 3 terminals max. 2.5 mm² TD RD GND (RxD from PC) (TxD from PC) (GND from PC) or Western socket RJ-12
- 24VAC/DC, 230VAC connection:
- 3 terminals max. 2.5 mm²
- Operating temperature:
- 0 to 50°C
- Relative humidity:
- 0 to 90 % (non-condensing)
- Housing:
- In accordance with EN 50022 for installation on DIN-rails, 6TE units
- Degree of protection:
- IP 20
- Dimensions (L x W x H):
- 108 x 90 x 66 mm (6 TE)