M-Bus repeater, BIALON MRPT-120
Met de BIALON-MRPT-120 M-Bus-repeater kun je het aantal apparaten vergroten om aan het M-Bus netwerk te koppelen.
Me de repeater kan ook de bus lengte van het M-Bus systeem worden vergroot. Aan de actieve kant kunnen tot 120 M-Bus eindpunten
(elk met een standaard belasting van 1,5 mA) worden aangesloten.
Product varianten
| Artikelnummer | Productnaam | |
|---|---|---|
| 095174 + | BIALON MRPT‐120 230Vac | + Vraag offerte aan |
| M‐Bus repeater fvor 120 M‐Bus apparaten, galvanic isolation, power supply 230Vac | ||
| 095175 + | BIALON MRPT‐120 24Vac/dc | + Vraag offerte aan |
| M‐Bus repeater voor 120 M‐Bus apparaten, galvanic isolation, power supply 24Vac/dc | ||
Beschrijving
The BIALON-MRPT-120 M-Bus repeater lets you increase the number of devices that can be connected to the M-Bus system, and extend the maximum bus length. On the active side, up to 120 M-Bus endpoints (each with a standard load of 1.5 mA) can be connected.
The M-Bus repeater features overload protection and is thus short-circuit protected. The trip threshold is 110 mA. Additionally, the M-Bus interface has overvoltage protection on the bus side.
The LEDs indicate the major operational and malfunction states, such as power supply, send or receive data, and bus overload.
The BIALON MRPT-60 M-Bus repeater is available in two variants with a 230 V AC or 24 V AC/DC power supply.
Specificaties
- M-Bus repeater:
- Up to 120 M-Bus endpoints (standard load: 1.5 mA
- Supply voltage:
- 110 V to 250 V AC or 20 V to 28 V AC/DC
- M-Bus voltage:
- 36 V - 42 V
- max. M-Bus idle current:
- 180 mA (120 standard loads)
- over current threshold:
- <200 mA
- Electrical isolation:
- between the M-Bus channels (active and passive sides)
- M-Bus transfer rate:
- 300 … 9600 baud
- LED indication:
-
- LED green: power on
- LED yellow: Transmit M-Bus
- LED green: Receive M-Bus
- LED red: Bus Overload
- M-Bus (active) connection:
- 4 separate terminal pairs max. 2.5 mm²
- M-Bus (passive) connection:
- Terminal pairs max. 2.5 mm²
- Operating temperature:
- 0 ... 40 °C
- Relative humidity:
- 0 ... 90 % (non-condensing)
- Housing:
- In accordance with EN 50022 for installation on DIN-rails, 6 devision units
- Degree of protection:
- IP 20
- Dimensions:
- 108 x 90 x 66 mm (6 TE)