RS232 naar RS422/RS485 omvormer, K2-ADE
De K2-ADE en K2-ADE-TB zijn mini RS232 naar RS485-converters. De K2-ADE heeft een microprocessor voor automatische besturing van RS485-stuurprogramma's (ADE is Auto Drive Enable) en heeft geen RTS aanbesturing nodig op voor half-duplex RS485 bus. Ze worden gevoed via de RTS en DTR signalen van de RS232 sub-D 9-poort . Aan de RS485-zijde bevindt zich een sub-D 9 of schroefklemmen aansluiting.
Product varianten
| Artikelnummer | Productnaam | |
|---|---|---|
| 1111-01-1102-10 + | K2-ADE | + Vraag offerte aan |
| RS232<>RS485 ADE omvormer 9/9 pole sub-D | ||
| 1111-01-1102-11 + | K2-ADE-TB | + Vraag offerte aan |
| RS232<>RS485 ADE coverter 9 pole sub-D/TB Connector | ||
Beschrijving
The K2-ADE is a non-isolated RS232 to RS485 converter for 1200-38400 baud, with Option 01 for 115200 baud. It contains a microprocessor for automatic RS485 driver control and does not need RTS Control. The K2-ADE is intended for RS232 to 2-wire RS485 conversion. It is not recommended for RS232 to RS422. It has a DB9 female connector at both ends. Features include ...
- RS232 port-powered in most applications
- Automatic Driver Enable (ADE)
- 400 watt surge protection on RS485
- Very low supply current
- RS232 output swings above and below ground for maximum compatibility
The K2-ADE-TB is a non-isolated RS232 to RS485 converter for 1200-38400 baud, with an option for 115200 baud. It contains a microprocessor for automatic RS485 driver control and does not need RTS Control. The K2-ADE-TB is intended for RS232 to 2-wire RS485 conversion. It is not recommended for RS232 to RS422. It has a DB9 female connector on the RS232 port and a removable terminal block on the RS485 port. Features include ...
- RS232 port-powered in most applications
- Automatic Driver Enable (ADE)
- 400 watt surge protection on RS485
- Very low supply current
- RS232 output swings above and below ground for maximum compatibility
Specificaties
- Serial parameters:
- 1200, 2400, 4800, 9600, 38400/115200* baud, (8 data bits or 7 bits + parity); 9600 (8 bits + parity). Any number of stop bits. Break levels supported. * 38400 is standard, 115200 is option 01
- RS232 interface:
- RX threshold +1,5V typ.
- RS422/RS485 interface:
- RX threshold 200mV typ. (defferential) • Max. common-mode voltage -7V to +12V
- RS485-ADE:
- Automatic line turn around in RS485 mode
- Supply current:
- 3,5mA (1200-9600 baud), 5mA (19200 baud), 7mA (38400/115200 baud)
- Supply voltage:
- RTS & DTR RS232 port or +6 to +16VDC on pin 9
- RS232 connector:
- Sub-D 9 pole female
- RS422/RS485 connector:
- K2: Sub-D 9 pole female • K2-TB: Screw terminal block
- Protection:
- 400Watt surge protection
- CE compliance:
- Emissions EN50081-2, imminity EN50082-2
- Operating temperature:
- 0°C to +50°C, RH 0 to 90% non-condensing
- Dimensions:
- 34mm (w) x 17mm (h) x 62mm (l)