SAP-10006902
TTY 20mA to Singlemode converter, DL-TTY
Product group
The DL-TTY forms an asynchronous TTY- interface (20 mA active, half-active or passive) which can be operated in two ways: either half-duplex or full-duplex (please note the schematics opposite) via Singlemode fiber optic cable. LEDs and potential-free contacts (optional) of a fault detector relay are able to signal defective states.
Product variants
Article Number | Product Name | |
---|---|---|
SAP-10006902 + | DL-TTY/1x13-SM-ST TTY/SM/PzP/FV | + Request quote |
TTY-bus (20mA) to Singlemode converter for a poin-to-point conection, ST adapter. | ||
SAP-10006901 + | DL-TTY/1x13-SM-SC TTY/SM/PzP/FV | + Request quote |
TTY-bus (20mA) to Singlemode converter for a poin-to-point conection, SC adapter. | ||
SAP-10000253/10000260 + | DL-TTY/1x13-SM-SC-BIDI TTY/SM/PzP/FV | + Request quote |
TTY-bus (20mA) to Singlemode converter for a poin-to-point conection, SC-BIDI adapter (1 fiber for Rx/Tx). |
Description
The system DL TTY forms an asynchronous TTY- interface (20 mA active, half-active or passive) which can be operated in two ways: either half-duplex or full-duplex (please note the schematics opposite). LEDs and potential-free contacts (optional) of a fault detector relay are able to signal defective states. FiberView (FV) is an indication for the quality of the fiber optic connection.
Specifications
- FO-connector:
- ST, SC or SC-BIDI
- Fiber type:
- Singlemode 9/125µm
- Optical budget:
- 17 dB
- FO range:
- 30 km (0.4 dB/km)
- Wavelength:
-
- 1310 nm
- BIDI 1310 nm / 1550 nm
- Data rate:
- 57,6kBit/s
- Transmission type:
-
- Full duplex - active, half active or passive
- Half duplex - active or passive
- TTY connector:
- 9-pole Sub-D female and 6-pole terminal
- Status LEDs:
- Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
- Power supply:
- 12 to 30 VDC or 24 to 60VDC
- Power consumption:
- 150 mA (24 V)
- Operating temperature:
- -40°C to +70°C (Multimode and Singlemode with ST or SC) / -20°C to +55°C (all others)
- EMC:
- EN61000-6-2/EN55022 Class B + A1 + A2
- Weight:
- 500 g
- Dimensions:
- 60(W) x 120(H) x 110(D) mm
- Housing:
- Stainless steel, powder coated