SAP-10006907
TTY 20mA to Multimode converter, DL-TTY
Product group
The DL-TTY forms an asynchronous TTY- interface (20 mA active, half-active or passive) which can be operated in two ways: either half-duplex or full-duplex (please note the schematics opposite) via Multimode fiber optic cable. LEDs and potential-free contacts (optional) of a fault detector relay are able to signal defective states.
Product variants
Article Number | Product Name | |
---|---|---|
SAP-10006907 + | DL-TTY/1x13-MM-ST TTY/MM/PzP/FV | + Request quote |
TTY-bus (20mA) to Multimode converter for a poin-to-point conection, ST adapter. | ||
SAP-10007147 + | DL-TTY/1x13-MM-SC TTY/MM/PzP/FV | + Request quote |
TTY-bus (20mA) to Multimode converter for a poin-to-point conection, SC adapter. |
Description
The system DL TTY forms an asynchronous TTY- interface (20 mA active, half-active or passive) which can be operated in two ways: either half-duplex or full-duplex (please note the schematics opposite). LEDs and potential-free contacts (optional) of a fault detector relay are able to signal defective states. FiberView (FV) is an indication for the quality of the fiber optic connection.
Specifications
- FO-connector:
- ST or SC
- Fiber type:
- Multimode 62,5 (50)/125µm
- Optical budget:
- 13 dB
- FO range:
- 5 km (2 dB/km)
- Wavelength:
- 1300 nm
- Data rate:
- 57,6kBit/s
- Transmission type:
-
- Full duplex - active, half active or passive
- Half duplex - active or passive
- TTY connector:
- 9-pole Sub-D female and 6-pole terminal
- Status LEDs:
- Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
- Power supply:
- 12 to 30 VDC or 24 to 60VDC
- Power consumption:
- 150 mA (24 V)
- Operating temperature:
- -40°C to +70°C (Multimode and Singlemode with ST or SC) / -20°C to +55°C (all others)
- EMC:
- EN61000-6-2/EN55022 Class B + A1 + A2
- Weight:
- 500 g
- Dimensions:
- 60(W) x 120(H) x 110(D) mm
- Housing:
- Stainless steel, powder coated