RS232/RS485 to Ethernet converter, MDB-E
MDB-E is a bidirectional converter between the Ethernet communication channel and RS232 / RS485 serial channels. Therefore, it allows all devices equipped with a serial port to communicate with software or cards on Ethernet communication. MDB-E also acts as an RS232 / RS485 converter. Thanks to the NFC interface (Near Field Communication) the configuration is very simple and practical. A dedicated APP allows you to read, modify and set all
device parameters. The galvanic isolation of the serial ports ensures protection for all connected instruments and is a guarantee of isolation from the rest of the system.
Product variants
Article Number | Product Name | |
---|---|---|
414-MDB-E-01 + | MDB-E | + Request quote |
RS232/RS485 <=> Ethernet (RJ45) MODbus TCP/IP |
Description
MDB-E is a bidirectional converter between the Ethernet communication channel and RS232 / RS485 serial
channels. Therefore, it allows all devices equipped with a serial port to communicate with software or cards
on Ethernet communication.
MDB-E also acts as an RS232 / RS485 converter. Thanks to the NFC interface (Near Field Communication)
the configuration is very simple and practical. A dedicated APP allows you to read, modify and set all
device parameters.
The galvanic isolation of the serial ports ensures protection for all connected instruments and is a
guarantee of isolation from the rest of the system.
GENERAL
• Ethernet 10/100 MB/s
• Optoisolated RS485
• Optoisolated RS232 (Rx, Tx, GND)
• Serial communication speed up to 115.200 bit/s
• Power supply 9-32VDC
• Average consumption 30mA
SOFTWARE
• ModBus TCP/ModBus RTU conversion on RS485
• ModBus TCP/ModBus RTU conversion on RS232
• ModBus RTU RS485/R232 conversion
• Bidirectional protocol conversions on all channels
• Easy and fast configuration through APP
• Default parameters: IP: 192:168.1.100 DHCP disabled 9600 bps
Specifications
- Serial port:
- 115k2 bit/s
- Serial signals:
-
- RS232 | TxD, RxD, GND
- RS485
- Connectors:
- Srew terminal
- Protection:
- RS232 and RS485 ports are opto isolated
- Ethernet network:
-
- 10/100 MB/s (RJ 45)
- ModBus TCP/ModBus RTU conversion on RS485/RS232
- RS485/RS232 Modbus RTU conversion
- Modes:
- DHCP
- Administration:
- MDB-E is equipped with an NFC interface that allows the configuration of all system parameters via the iBridge APP
- APP:
- integrated browser
- LED indication:
- 1 diag. LED, 1 LAN LED & 1 RS232 LED
- Power supply:
- 9 - 32VDC
- Dimensions & weight:
- 18 x 90 x 60mm
- Environment:
-
- Operating temperature | -20°C to +60°C
- Operating humidity | 0 to 80% without condensing
- Storage temperature | -40°C to +80°C